Started the l245 up today noticed a oil leak coming from behind the oil filter out of a factory hole in the block. There is a few of these holes on both sides of block this one will shoot a stream of oil out. .Does anyone no why or can i tap it and put a short bolt with sealer on it to seal it...
Thanks from the info.Iwould like to no if when u break the bleeder on the in jector pump if it will gravity bleed itself or will i have to crank it over. Thanks john.
On a l245 spin on fuel filter the videos vic did he did not hit on to pre fill the fillter or not. After installing new filter will i have to bleed the lines.This will be first time i will be doing the fuel filter any help or advice will be appreciated.
Went to start it just clicked. Boost it off ran fine parked it turned off so tried to restart would not start. Boosted it again check volts at battery was 11.75 so check ed at alternator 11.75. Do not no if it has built in regulator or external. It seems that alternator would be bad to me dont...
Wolfman do u think a person can just remove rear wheel and all bolts on oval pan and it will remove axel not having to pull the fender and rest of all the houing.
Need help. Can anyone tell me step by step how to remove the right rear axel on a kubota l245 ,need to weld crack and replace seal. Thanks for any help.
It started out as every now and then that it would click .So it got happening more often so bought a new 1000 c.c.a battery did not solved problems. When it would click i would peck on starter did not do anything peck on selonied fired right up .shut off restarted tractor sametbing pected on...
thanks for info seen them right off. where would i find drains for right and left axle cases ,and when refilling hydraulic fluided will it fillaxle cases to.
Have a l245 with a snow blade on t he front. would like to remove blade, lines,leavers and all mounting hardware. need to know if i can block the two lines off that come from rear off tractor going to leavers or will that mess the hydralics up?