Search results

  1. G

    Flat face 3rd function issues

    I disconnect one hose and attach this. Air in the black pipe lets the oil expand. On the tractor side shut off turn key on. Press the buttons a few times.
  2. G

    Emergency, quick response needed, L6060 subframe?

    I have had mine off. No issue at all. I think 060 has welded on brackets for the 3rd function kit.
  3. G

    Giving Up on Buying a New Kubota

    I love my Kubota but you might want to look at Kioti. They lift more.
  4. G

    HST fluid change - Perhaps an easier way to refill?

    I have this. https://flowjoe.com/products/gasguzzler I pump Gas, Diesel and UDT2 with it.
  5. G

    Finish mower blade sharpening? Jigs, freehand, angle grinder, bench grinder, stone, paper?

    This works real good. Not for brush hog. https://www.allamericansharpener.com/?gclid=CjwKCAjwyY6pBhA9EiwAMzmfwaLYyxTPdkIP4UdxH2Xm6y0ItwoPSkeJzj2L3iBEhpj-buNvzMGKuBoCw-0QAvD_BwE
  6. G

    10 Month MX Experience

    https://www.amazon.com/Radiator-Genie-Cleaning-Efficiency-Radiators/dp/B01NAU8J6D/ref=sr_1_1?crid=2DUEOW8Z9Y2WF&keywords=radiator+genie+water+and+air+cleaning+wands&qid=1695984274&sprefix=radiator+GENIE%2Caps%2C123&sr=8-1 This will clean your radiator.
  7. G

    Using QA pallet forks on 3PT

    I have that adaptor. It works good. I also have a hydraulic top link so I can adjust the angle. I use it for real heavy loads.
  8. G

    Pallet Fork Platform

    It is 12' wide. If I jump on a corner I can lift a back tire up. I put a counter weight on it.
  9. G

    Pallet Fork Platform

  10. G

    Pallet Fork Platform

  11. G

    Pallet Fork Platform

    I made a 4'x8' one out of 2x8 and plywood. I ratchet strap it to the loader. My wife got off the RH side and bumped the roll. I stayed on by hanging onto the railing.
  12. G

    Pallet Fork Platform

  13. G

    Pressure on Hydraulic lines

    I soon as I unhook the attachment I hook this up. There is air in the black pipe. Once in a while I open the ball valve to let the oil out.
  14. G

    Newbie Tractor Advice Needed?

    Are the loader arms bent? It looks like the bucket is not level. 4,000 hours is a lot if it has not been well cared for.
  15. G

    Cleaning a fuel tank without taking your tractor apart

    That is to big for my L4060. It does fit my ZD1211 zero turn.
  16. G

    L3902 vs L4802 in 2023

    If you are brush hogging up hill the brush hog uses most of the power so you don't have much left for the tractor. You end up slow up the hill. More HP would help a lot going uphill. I have a L4060 and a 12' finish mower. I can go about 1 1/2 mph up the hill. Luckily I can mow it sideways so I...
  17. G

    KUBOTA Pressure Increase kit

    I ordered one today.
  18. G

    Fuel issue

    On the L4060 there is a check valve in the cross over tube (#10) so it does empty the tank with the fill neck first.
  19. G

    3 point forks

    https://www.palletforks.com/tractors/3-point/adapters-and-mounting-plates/3-point-to-universal-quick-tach-adapter-skid-steer-tractor/136210.html
  20. G

    L4060 HSTC PTO takes a minute to disengage sometimes.

    This is where the check valve is.
Top Bottom