Search results

  1. IVAN tnst

    B7510 PTO gear shift fork broken

    Thanks Wolfman, I plan on doing this on my garage floor (good level concrete) and I have a 3 ton super heavy duty floor jack. I will follow you recommendation and take the ROPS and the fender off, we can never have enough room to work. Thanks again, and I'll post some pictures and how it went...
  2. IVAN tnst

    ZD331 with starting issues

    When things don't want to start like that I usually look at all the safety switch and disconnect and reconnect them a few times since your ZD has a little bit of hours and seems to had a little water problem you want to make sure that you don't have a bad connection on your circuit done by some...
  3. IVAN tnst

    B3030 - Dash Removal - Ignition Switch

    I might be late but, I've got a 7510 which is the cheaper version of yours and looking at the parts illustrations it look similar to mine so, You have to remove the steering wheel then the instrument panel ( small tab on each side) tilt it back and you will see a couple of connectors then once...
  4. IVAN tnst

    B7510 PTO gear shift fork broken

    I'm not worried about the weight thanks Dr. but like Wolfman said it will be easier to move the back end away. Wolfman; do you keep the ROPS and the rear fender on or they really have to be off, I know the floor has to go. Thanks guys.
  5. IVAN tnst

    B7510 PTO gear shift fork broken

    Thanks for the replies guys, the tractor has 240 hrs on it, I will certainly be looking for any leaks or wear. I talked to the dealer and they told me that it was a 14 to 16 hrs job for them. Looking at the WSM it does not look to be to hard and the fork is $120. I'm an aircraft mechanic and...
  6. IVAN tnst

    3pt quick hitch

    I bought an Agrease ( chinese I suspect) for my B7510 and love it. The attachment for the top link is adjustable so it can fit many heights for all my implements. A lot less painful now to switch between them now. Ivan
  7. IVAN tnst

    B7510 PTO gear shift fork broken

    Hey guys, A little advise is needed here, I broke the PTO gear shift fork and I'm looking at splitting the tractor to do the job myself. I bought the WSM and was wondering if there is special things I should be looking for and if I should be changing anything else while I'm in there? Thanks. Ivan
  8. IVAN tnst

    LA 302 loader control valve

    Please let us know if it does any change to your problem. I've noticed the same problem happening a few times and tried to reseat the quick disconnect but also noticed taht this would happend when the 3 point hitch lever was at full down or full up (maybe moved by my elbow or something). For...
  9. IVAN tnst

    Front loader/ Rear ballest

    I have ballast in the rear tires and ususally have my Box Scrapper or my grader blade and so when I take a full bucket of gravel the tractor does not become off level. The ballast in the tire alone makes a BIG difference. Good Luck Ivan
  10. IVAN tnst

    Wood Chipper

    Hey guys, I'm looking at buying a Agri-ease 4" wood chipper and was wondereing if any of you bought one and how they like it or not and if it will be OK for my B7510, Thanks. Man, I love this forum.....:)
  11. IVAN tnst

    B7800 loader

    Hey Bud, Mine did the same thing last weekend, I did not have a clue but after disconnecting the FEL hydraulic quick disconnecting lines and reconnecting them it started to work again......:confused: Air-lock is my guess, worth a try...good luck. Ivan
  12. IVAN tnst

    Front Diff. lock or anti-slip?

    Thanks Guys, I will look at the video and No, I did not howl at the moon last night.....:D
  13. IVAN tnst

    Front Diff. lock or anti-slip?

    Good day guys, Bought a B7510HST a month a go and just love it. It's only when you have one that you wonder how you did it without for so long, anyway. When on 4WD, is the front Diff full lock or is it only one wheel that gets the power? Mine, only one wheel will spine when slipping. Did I say...