Search results

I keep seeing a FZ2100 advertized for sale. I am interested in this mower and I like the out front deck and stering wheel set up. Could any of you guys please tell me the good, and bad points on this mower. It is about 3.5 hours away from me, to far just to go look at without knowing what to...

I have a really dumb question for you guys. I have a Kubota Z724 zero turn mower and I like the mower but, what I call the control arms, or the levers you steer with are really stiff to move back and forth. They are not stuck they just take a whole lot more effort than my other zero turn...

What do any of you guys have for battery jump packs? My newest and least favorite battery charger just died and I think a jump pack to start the vehicle and get it to the shop would be handy. My L3800, B2410 and my Zero turn 724 mower all start great, but my RTV400 I'm sure has a parasitic...

When I bought my L3800 I had the dealer put hyd. couplings on the back so that I could use hyd. clyinders for 3pt or towed implements. He put on two couplings to I could use double acting cylinders, which works fine. My problem is that when using my disc mower with a one way cylinder, it will...

I'm not always able to be near a Kubota dealer when I need to change oil in my 724 zero turn mower, with the Kaw. FX730V engine. I have called several auto parts stores to see if they could cross reference a kubota oil filter number (49065-0724 ) for me, I have had dismal luck so far getting a...

Today we changed transmission filters and oil in my B2410. After changing the filters and adding new oil, and a test drive, which went just fine, I got to thinking about the oil I just added. It was in a Kubota Udt2 container I got this jug of oil from the guy i bought the tractor from last...

I have the stabilizer bars on my L3800 that you move the pin from hole to hole to adjust the length. This kind bar works really good on my L3800 ford makeing the 3 pt arms more stable. Do you guys know of any one makeing them for the B series (B2410) or am I going to make my own? Messicks...

I know this is kind of a silly question but I don't like to mix different brands of oil. I have been using Rotella T6 oil in my Kubota stuff (L3800, Z724 mower ,400 RTV ,BX 1850 )now I have a B2410 to service also. It seems that Rotella T6 is getting hard to find . What brand of synthetic...

I'm probably going to end up driving a ways to loo k at a 2003 b2410. It has a 60" belly mower and a la305 loader, with 800 and some hours on the tach, and turf tires. In the pictures I've seen it looks pretty decent. Is Is there anything I should be sure to...

This one has me scratching my head. How in the world does a person get the starter off of a 400rtv?? Is there an easy way without taking the whole engine bay apart? Any help or suggestions would be appreciated. Thanks Jim

It started back in Aug. I shared my problem on here, and figured out that I had some water in the fuel., and a contimanted fuel supply tank. I ended up with a new to me diesel tank and added a fuel/water filter to my L3800. I fhought I would share a picture of what I finally ended up with...

Today while using a rotary mower behind my L3800, (415 hrs on hour meter) it started to loose power, running rough, and blowing some white smoke. I shut the mower down, slowed the engine down to an idle and headed for the shop. I changed the fuel filter, and made sure I had a full stream from...

What tractor model number started using the metal fenders ? or what was the last model number using plastic fenders?

I have a B7100 tlb for sale serial no. B7001-44116 I have replaced several pins, etc. on the backhoe this fall, it comes with two buckets a new starter and new tach were also added this fall, the old tach shows a little over 1400 hours. I have added a bigger hyd supply tank for the loader...

My BX 1850 has been running great until today. Mowing after a while the RPS's will drop, power is gone and the tractor will almost stall and die then it will come part way back on the RPM's, I changed both fuel filters thinking that may be the problem but no such luck, it will still lose RPM's...

On my BX 1850 ,the speed change, rocker pedal, attaches to a rod under the floor board. This rod goes to what kubota calls a trunion arm that is attached to a shaft comming out of they hydro unit. My problem is that the seal around the shaft comming out of the hydro unit needs replacing again...

The hyd trans/rear end filter was not sealing tight or so I thought. Today I took the floor boards off and the seat and fenders. I cleaned up everything and found the seal on the forward/reverse shaft was the culprit. This is right above the hyd filter. This is the same seal that I had my...

I changed the transmission/rear end hyd filter on my BX 1850. It wants to seep a little bit of oil, so I tried another new Kubota filter and it does the same thing, drip, drip. It doesn't seem to matter how much I tighten the filter, it still drips. Both of the filters are new and looked...

I'm putting a new water pump on my BX1850, I haven't worked with aluminum parts before. What kind of gasket sealer should I use?? Any ideas or suggestions would be appreciated, Thanks, Jim

The fan belt has stretched about as far as it will go, and I need to put on a new one. Is the drive shaft going to be a bear to get unhooked? What is the easiest way to change the fan belt on my BX1850 ? Thanks in advance for any ideas or suggestions, Jim