Search results

  1. P

    Hydraulic Flow Reducer

    I took a fitting and tapped the inside to hold a set screw. I then drilled the set screw to reduce the flow as required. Cheap, easy and adjustable.
  2. P

    Bleeding injectors air bubbles

    I have several Kubotas...and one time or another I have had to do this.... the last time was after fixing the steering box on my L225 (which required fuel tank removal. It still had fuel in the filter and beyond, but clearly air in the from the tank to the filter. It took much longer than i...
  3. P

    ISO: Loader for L235

    I think you will have a hard time finding a loader....they almost always stay with the small tractors. I was lucky to find a JD 200cx loader at the right price and with a little modification put it on my L235DT.
  4. P

    Hydraulic top link shuddering/chattering

    What is usually done to slow that down? An orifice?
  5. P

    Hydraulic top link shuddering/chattering

    When I retract my top link....in getting a chatter. No other cylinders have an issue, only retracting too. New fluid, new filters, and filter screen clean. Loader, 3pt hitch and tilt cylinder all work fine. https://photos.app.goo.gl/DnHK6nB3hUAh5Fow5 Is it the pilot operated check valve? Any...
  6. P

    B7316 Rear Remote kit.....does anyone have a manual or installation pics

    I'm looking for some pics or info about the B7316 rear remote kit. Cheers, Rob
  7. P

    Tooth bar for bucket

    May 3rd. Sent from my Pixel 2 XL using Tapatalk
  8. P

    Tooth bar for bucket

    I have no issue with successful companies having a backlog. Bxpanded is however the worst at customer management.....if you can make 2 bars per day....and you have a 100 before mine....it takes 50 days to build mine. Tell the customer that. I ordered. They took my money immediately, sent email...
  9. P

    Tooth bar for bucket

    Where did you order that toothbar? Sent from my Pixel 2 XL using Tapatalk
  10. P

    Backhoe subframe BH4973

    I believe the bh77 backhoe installation manual is on kubotabooks....it has the instructions for the subframe Sent from my Pixel 2 XL using Tapatalk
  11. P

    L225....Steering wheel just spins...

    Thanks for the info guys. I will dig into it this week and see what is up. Sent from my Pixel 2 XL using Tapatalk
  12. P

    L225....Steering wheel just spins...

    So I clearly have a steering problem :( Before I get into it this week if the steering wheel just spins....is it the likely cause a broke worm gear or shaft? or are there other culprits?
  13. P

    Almost factory rear remotes for a B3300.......finally!

    It always bothered me that the BX series got the affordable nicely integrated valve kits.....and the B series got nothing :( After reading a BX7376 and BX7326 install threads....i decided to take the chance and buy a BX7376 kit and try to make it work. It took a mod to the valve, and a...
  14. P

    Tank port on B3300

    The answer is 3/8" hose. I cut into it today.... Sent from my Pixel 4 XL using Tapatalk
  15. P

    Tank port on B3300

    I was hoping on of the people that had added rear remotes might recall the size.... Sent from my Pixel 4 XL using Tapatalk
  16. P

    Tooth Bar Review (BXPanded - Piranha)

    I ordered mine on May 3rd....nothing yet either. I can't get across the border to pick it up from my mailbox until they lift travel restrictions.....so I'm in no rush Sent from my Pixel 4 XL using Tapatalk
  17. P

    Tank port on B3300

    No worries. I wish the kubota parts list fitting sizes....i'd love to be organize before taking it all apart. Sent from my Pixel 4 XL using Tapatalk
  18. P

    Tank port on B3300

    I looked through the parts diagram and both ends of the tank line from the loader are barbed fittings head-on with clamps. That line is painted Grey at the factory...no markings Sent from my Pixel 4 XL using Tapatalk