Search results

We have Grey L2201DT and wonder about the reduction gear on the rear wheels I see a drain and filler cap bolts- but does that gear housing get it's lube from the transmission fluid level. or is it a separate fluid. In freezing weather the hydraulics do not work -I'm thinking there is a lot of...

Howdy Gang. The right side hydraulic ram's rear fitting is hitting the front tire Left side is fine looking at the two pictures On the top of the Right side main arm (where the Buhler name is) looks lower than the Left's sides arm is there some adjustment or is the frame twisted? Thanks Hank

I was given this Kubota 2201DT if I could get it running. It had a frost plug leak and dead alternator. We got a huge dump of snow early in the winter. It was clear and cold I jumped on our 2201DT gave it some glow plug and it starts right up. I started pushing snow, cleared the road to my...

Hi Gang, I was offered a L2201DT tractor if I could get it running and out of the field it had been sitting dead for a couple of years- with the engine cover off and laying on the ground next to the tractor. I brought a new battery and fresh diesel - I tried the starter switch but nothing so...

How about adding your best working idea. Here is mine working with logs at our sawmill and getting tired of having the hard wood handle rot if left outdoors over the winter then break when used real hard. I came up with this. The aluminum ball bat fits tightly with some smacking then drill a...

Hi Gang, I'm looking for a PTO U Joint 80mm across with caps on and 78mm across with the caps Off 25mm caps with internal C snap ring thanks Hank

Hi Gang, I just pulled my RS1357 tiller chain drive side apart and found the lower bearing and seal destroyed , so I'd like to buy new parts The RS1357 decal was damaged so the "7" might not be a 7 the aluminum tag is pretty hard to read but the serial number might be 16046 I have pictures and...

Hi Gang, The rear brakes are dragging most of the time, we have to pull the foot pedal up by hand. Squealing noises when starting out. It doesn't look like the brakes are in the reduction gear housing so they must be in the differential area. Would I have to pull the top off of the differential...

Hi Gang, Changing all the fluids on our 1801DT (L185) there is a large bolt on the top of each side of the front axle tube. I assume to fill the front diff. Is that correct? Also I seem to remember a bolt on the side of the transmission to show top level of the fluid. I removed a couple 12mm...

Hi Gang, We have some serious sounding problem inside the guts of our 1801dt (185) 4x4 tractor. I drained all the fluids looking for nasty parts in the oil. None found so I want to remove the whole top housing that has the 3 point hitch arms to look at the differential gears. I removed all...

Hi Gang, Serious clunks in the rear of our L1801DT so I'm looking for a parts or repair manual. thanks Hank

Our L175DT tractor has just starting to make some serious clunking and jerking when moving forward. Sounds like in the rear differential. It seems the only thing to do is drain the fluid and see what comes out with the lube. Just wondering what the availability of parts for this machine are...

Hi Gang, Older Kubota 4x4 18hp 2 cylinder model 175 with tiller A front end loader has been tapped into the hydraulic lines all works good. I'd like to change the fluid levels and not sure what oil goes where and how much. front diff front angle drives 2 -27mm bolts on axle tube- how much...

Hi Gang, Any body happen to know of a place to get tiller tines? I imagine that there are different sizes the tractor is a 3 cyl Kubota approx. 20 hp with Japanese tiller (not sure the number) I'll be measuring the tines I have for sizes any dealers or suppliers thanks Hank