Search results

  1. A

    Kubota L 35

    I went down to the tire place today and looked at my rim. Yours is I think the same other than the center plate is positioned one inch deeper than mine. i think it would bring the tire closer to the inside fender by an inch and unless i used spacers or something I wonder if it would work. I...
  2. A

    Kubota L 35

    Here is a picture of what l meant in regard to the distance from the rim edge to the center plate. Also i found this number on the rim. It's apparently a part number.yours may still have one on it to compare thanks al
  3. A

    Kubota L 35

    I went out and tried to measure the rim that is still on the tractor. I took the other tire and rim down to a tire place and left it with them, and I can't get there till Monday. im unsure of two measurements in your pictures. My center hole is 5 3/8, like yours. My lug spacing is 6 5/8 like...
  4. A

    Kubota L 35

    Also, my zip is 14858
  5. A

    Kubota L 35

    Ok, I'll wait to hear from you. Al
  6. A

    Kubota L 35

  7. A

    Kubota L 35

  8. A

    Kubota L 35

    it looks like mine! Must be it ! I live in western New York. I've never bought something like this online before, so what do you want for it and how do I pay, and how do you ship it? Al
  9. A

    Kubota L 35

    Looking for a rear rim for my Kubota L35. Tire size is 12 x 19.5. Thanks!
  10. A

    Kubota l 35 Mystery Lever--Help!

    Hey Daverd4 Wow!looks lie a huge job!. Can you take more pictures of the inside of the transaxle? ( if you still have it apart.) I am still interested in seeing what the pedal on the left side of the floor of the tractor actually does. It somehow disengages the 4 wd. i'd love to see the gear...
  11. A

    Kubota l 35 Mystery Lever--Help!

    Thanks wolf man I appreciate your comments, though I don't know if I have the talent to fix this. I can rebuild a Diesel engine from scratch but don't know about splitting a kubota. It occurred to me that maybe I didn't cause this problem. Ever since I changed the sheet metal I became aware of...
  12. A

    Kubota l 35 Mystery Lever--Help!

    Hi Stubbyie I'm still working on mt L 35 problem though it rained last night and was cold. I was lazy and didn't go out. The night before I removed the fenders and floor and seat and everything again. I did it because I wanted to see how far the pedal would travel down and what would happen to...
  13. A

    Kubota l 35 Mystery Lever--Help!

    Hi Guys So I crawled under the L 35 and drained the fluid through a drain plug that is on the left side bottom of the housing. I put it in a clean pan and got about 7 gallons of it. I then took one of those inspection cameras and put the end up into the drain plug hole. Oh, I did make sure the...
  14. A

    Kubota l 35 Mystery Lever--Help!

    I was looking at the service manual and this lever goes in the transmission on the lower left side. Looks like the end of it sits in a 17 tooth gear and moves the gear up and down a shaft. What are my chances of unbolt in got lever from the side of the transmission and trying to get the lever...
  15. A

    Kubota l 35 Mystery Lever--Help!

    There is a lever on the left side of the floor of my L 35 which according to the manual is the "Front Wheel Drive Lever". My front wheel lever drive lever flops around as though it is disconnected. I got under the tractor and saw where it connects to a shaft on the transmission. There is a roll...
  16. A

    Wanted. Fenders for an L 35

    I'm looking for fenders for an L 35. In decent shape. I called the dealer and was told they were 662.00 each! Amazing! Anyone know of or have good used ones?
  17. A

    Need Used Rear Tire for L-35

    Hi Dave I'm replacing two of them this week. My old ones are better than half there. Unfortunately I'm in New york so shipping would be awful Al
  18. A

    Shuttle Shift Lever Adjustment and Parts Question

    I have an l35 as well. I have the work shop manual and would provide scans of it if that would be helpful. Al
  19. A

    What did you do to or on your Kubota today?

    I changes two of the pins and bushings in the font loader arms of my L35. Also I bought the dealer cables for the battery and replaced them. Previous owner had some NAPA cables that were way too long onit for cables.
  20. A

    What did you do to or on your Kubota today?

    I replaced the center steering pin and bushings in my L 35, as well as the radiator hoses. It was a pain, but my steering is nice and tight now.