Search results

  1. Dave_eng

    L5030 No Forward Movement

    See if you can get help with these two sections from the WSM Dave
  2. Dave_eng

    Kubota B7100 wiring problems

    Have you studied the pages in the b7100 dealing with a larger alternator installation instead of the basic dynamo? Instead of messing with an external regulator and a 35 amp alternator, to me the hard work is done getting an alternator mounted in lieu of the 10 amp dynamo. Now consider...
  3. Dave_eng

    Workshop Manual

    See if this helps. Not an exact match but close Dave
  4. Dave_eng

    L295DT Front Wheels OBLITERATED

    Contact 007kubotaguy as he is parting out older L's Use envelope symbol in top right corner of most forum pages. Dave
  5. Dave_eng

    New Here. Need help with BX2380

    I am thinking the end of the shaft may be splined and the tech is wanting you line the shaft spline with its female mate to slowly rotate the shaft while gently pushing in. I would start this way rather than an immediate extraction. Others who know this machine will post but try this while...
  6. Dave_eng

    Kubota wont start

    A word of caution, never use Quick Start, Either or the like. Are you bleeding one injector line at a time. In my experience this has helped on my old tractor. However NIW and D2Cat are the experts. Dave
  7. Dave_eng

    ZD25 Runs Bad

    Get an IR temp gun and use it to check exhaust temp on each cylinder. Temps should be close but if they are not you have narrowed down where your problem lies. Dave
  8. Dave_eng

    Front wheel wobbles

    Jack up front end and rotate each wheel. Look for bent wheel. Also check for proper bearing adjustment. Dave
  9. Dave_eng

    Workshop manual kubota l185

    I have a L185 Operators Manual which I don't think is on Kubota books. Using the envelope symbol at top right corner of most pages send me your email address. Dont post email's on public parts of forum. Dave
  10. Dave_eng

    Kommander Z125S Won't Do Anything

    I dont know if this service bulletin applies or will be of any help, Dave
  11. Dave_eng

    ZD323

    The switches could be different internally. One NC normally closed and the other NO normally open. Glad your problem is solved. Dave
  12. Dave_eng

    ZD323

    Here is the start circuit wiring diagram and operating logic. Where did you get the safety switch you bought as Mikester's comment makes a lot of sense Dave
  13. Dave_eng

    Big Pop

    I looked at the wiring diagram for the L3130 HST model and was surprised to see 5 slow blow fuses in addition to many regular fuses. Here is a slow blow color chart up to 60 amps but the wiring diagram has one going to 80 amps. Answer North Idaho Wolfman's question about what is or is not...
  14. Dave_eng

    B219 Lift Cylinder Specs?

    Yes that is the material. I must have done something wrong for my name "David" to appear in the link I provided. Dave
  15. Dave_eng

    B219 Lift Cylinder Specs?

    Kubotabooks at the following link has info for the B219 which I think includes part numbers. B219 Dave
  16. Dave_eng

    Fuel Knock

    My reply may not include this tractor but a failing mechanical lift pump diaphragm has filled many sumps with fuel. Dave
  17. Dave_eng

    M8540 Dash lights

    perhaps this dash wiring diagram will help you Dave
  18. Dave_eng

    L4701 P0605 code after battery cable failure

    Do not know your machine. Suggest you check all fuses carefully including two slow blow fuses which are located near battery. One is 60 amps and the other is 40. I have this reset document another owner posted. I do not know if it would apply to your tractor Dave
  19. Dave_eng

    ZD-1211 Stalled on incline

    Have you downloaded the WSM from Kubotabooks.com in the "Mowers" section? Books Its wiring diagram on page 222 shows a safety switch for each of the two levers, a brake switch and a pto switch. Your symptoms suggest a safety switch is shutting down the mower. Dave
  20. Dave_eng

    L245 3 point linkage problem

    Before taking things apart try sending a private message to " rbargeron." He owns and has owned a number of older L's plus is very well educated technically. It may be an issue with the feedback rod but ask Dick Dave