Search results

  1. B

    Adding lights to my B2650 ROPS

    My concern, when I wrote that, wasn't about blowing a fuse. I had read that the dynamo only puts out like 15 amps, total. I read that the tractor running normally uses about 5 amps, so I figured using 7 amps for lighting would make sure I wasn't starting to drain the battery....with plenty of...
  2. B

    Adding lights to my B2650 ROPS

    Do you run them off a switch, or they just come on when you turn the key? Do you use a switch and relay?
  3. B

    Adding lights to my B2650 ROPS

    Off by a factor of 4?? That's quite a difference between spec wattage and actual. I might buy some lights then and hook them up to a test stand and see how they rate before I decide how many to mount.
  4. B

    Adding lights to my B2650 ROPS

    I like the creativity of where the lights are mounted there. For my situation, I don't expect I'll ever have the FEL off, so it's always going to be an obstacle for lighting from the front. I was leaning away from floodlights just to save some wattage. I figured the spotlights, place up high...
  5. B

    Adding lights to my B2650 ROPS

    There are lots of great guides, though I can't seem to find any dealing with SPECIFICALLY the B2650. So the first thing I want to verify is the "work light lead". I THINK it's this, right? From what I've learned so far, I SHOULD be able to add about 84 watts worth of lights to ROPS before I...