Search results

  1. M

    Wiring in Light on the back

    So your saying just cut the connector off and wire directly to it, correct?
  2. M

    Wiring in Light on the back

    I'm only using one of those small lights, so it should be fine. Is there a connector that I can wire to the light that will then plug into this connector under the tractor?
  3. M

    Wiring in Light on the back

    Talking about this connector -->
  4. M

    Wiring in Light on the back

    Thanks! What kind of connector do I need? It looks like there is a connection there just waiting to be plugged in.
  5. M

    Wiring in Light on the back

    I know 0 about wiring in lights. I purchased an LED light off of Amazon, this one. And I also purchased this wiring kit. I'm only mounting one of the lights on the back. I see there are some connection under the left fender (L2501dt). Where do I even begin? I was hoping I could just make a...
  6. M

    L2501 3PH stabilizer problem

    Just took a pic for you, hope it helps. Bad quality in the dark.
  7. kubota_3pt.png

    kubota_3pt.png

  8. M

    Grease selection

    Thanks for the technical info B737! I did some research on BobisTheOilGuy and it seems that the Schaeffers 238 was a good recommendation for the FEL.
  9. M

    Grease selection

    Changed my mind, think I'm going to go with Schaeffer Manufacturing Co. 02382-029S Ultra Supreme Grease, NLGI #2
  10. M

    Grease selection

    Thanks guys, I saw in the manual that the FEL suggests moly.
  11. M

    Grease selection

    I think I've finally got it narrowed down to which grease to use, just wanted to double check I'll be using the right kind on the right parts. Valvoline Moly-Fortified Gray Full Synthetic - for the FEL (loader) and Lucas Oil 10005 Red 'N' Tacky - for the tractor Look good? Tractor is an...
  12. M

    Break in period

    I have never broken in a tractor, vehicle, atv, utv, etc… I buy it, then I use it to do what I need.
  13. M

    Laser cut L2501 floor mats

    Got mine in and put them on, fit like a glove. Highly recommended!
  14. M

    L2501 RPMs

    I did not know that.
  15. M

    L2501 RPMs

    Yeah I’ve been doin all my work around the 540 PTO mark. Was just watching a dude on youtube doing work at idle and was wondering why in the world he was doing that.
  16. M

    L2501 RPMs

    South GA area
  17. M

    L2501 RPMs

    New L2501 owner here, loving it so far. What RPMs should I be running for “typical jobs around the house”, box blade work, loader work, etc…
  18. M

    Laser cut L2501 floor mats

    Will these fit a 2021 L2501 DT? ETA: I scrolled through the thread and see where they are offered for DT. Working on getting a set now!!
  19. M

    L2501 or L4701

    I'm going with all "new" implements, not using the old tractors or implements. Don't think I'll add anymore land to work here. I've got around 15 acres total, but only work up to ~3 of the acres as far as planting/hunting; the rest is wooded.
  20. M

    L2501 or L4701

    Hello, new guy here. I'm looking for a new tractor, trying to decide between the 2501 or the 4701. I'd like the bigger tractor because I'd rather have it oversized vs undersized, but it's a 10k difference as well. I'm used to using a Massey Ferguson 135 and a Ford 3000 to...