Search results

Mine 2370-1 doesn't lock in the up either. The strange part is that without the deck on it will lock the arms in the hold position. With the deck on it doesn't because when lifted the deck can't lift any higher because the lift stops on the deck contact the bottom of the frame. I've lived with...

I deleted my earlier post after reading it over a few times I've come to the realization that this nipple/ part # is for the engine oil filter. Sorry for steering everyone wrong. As for seeing the fix it's been a few years ago and I can't seem to find the original post that I had read up on how...

Well I used to run my home built splitter off my tractors hyd system. MF 175 . It worked okay but every time I wanted to run the splitter ,well I had to get the tractor out hook everything up etc: I had access to a older 410 MF combine that I was able to remove the hyd oil tank and hyd pump...

Check the old thermostat first and see what it does. Could need a good flush cleaning like you mentioned . I use my tractor lots year round and have never had it go above 2 bars. Even in the winter I slip in a piece of carboard between the rad and the screen with a 4" round opening in the...

If your cleaning it like your saying then I take back what I said. Guess next would be remove the thermostat install a new one and see what happens. On a side note once you have the old one out test it in hot water to see if it opens this way you'll know for sure it's faulty

Seeing that there's a mouse nest on the top of the rad tells me just how often it gets service. Sorry but ant tractor mowing grass needs to have the rad cleaned regular. I mow with my BX 2370-1 plus use it for everything else loader work ,snowblowing etc:. I only have 1984 hrs on mine and have...

Feel the hoses and see if there hot on both sides of the valve. Possible with no flow through the line for 2 yrs that there's air in the line somewhere before the heater core.

The sweet spot on my BX 2370 with a front mount [Airens] blower is anywhere 2200 -2400 rpm. seems to be the best spot.

My BX sits in heated shop so no problems starting without glow plugs. Once outside well me in the homemade cab stays warm enough that no need for gloves or head gear. Cardboard in front of rad as well with 4-5" dia hole. Been blowing snow in -35 c plus windchill and Its been good.

Check to see if the brg/ bushing is worn on the side of the auger that keeps shearing . Could be that the auger is making contact with the blower housing either due to a dent or possibly getting gravel caught between the auger and blower housing.

I doubt it would work especially in heavy wet snow the camera would get covered in snow. I have a camera mounted on front of my side x side and when water splashes onto it you can't see anything again untill you wipe it off.

If what was mentioned above solves your problem good. If not then remove the hose and clean both surfaces . Overtime it will create a White /greenish/blueish film between the hose and housing . Of course this is why you have a leak due to buildup of scale.

One thing that I like is all the grease fittings on your blower. Always nice to see some ones posts of some of the struggles and then of course the fix / final outcome. Enjoy your blower when the time comes to use it. Happy snow blowing.

Looking at the end of the shaft looks like it's been hammered on and mushroomed the end of the shaft. From what I can see your going to first have to get rid of that burred end. If you can just leave the sprocket on this way you won't be grinding the shaft where its not needed to be. Either...

Mine isn't the same blower as yours but when I change oil [every spring ] the blower is off the tractor so I tip it up and over so the drain plug is straight down . Reason for spring time drain is after season use this way if any moisture in the oil will be drained out . I also repair any issues...

Yup what was mentioned above. Any parts store can get you a brg , just make sure you get a high end brg. eg: NTN, BCA, NKG don't opt out for a cheap china made brgs.

Looks good . Best part is you will enjoy using it inside your warm cab.

What those extra holes are for is when you have the Kubota rear bagger . There is a plate that bolts on that side that diverts the grass more towards the back of the opening .

Looks good . Wish I would have painted mine Kubota grey instead of the Orange.

Very simple . Make a small hole in the face of the seal with a pick or something simliar. Get a wood or metal screw and screw it into the seal and pull it out with vice grips. [ don't screw the screw in to deep as to make contact with the brg behind ] See attached pic.