Search results

It did. But so did a divorce.😞 the kioti along with some other stuff may have to go. I did put half and hour on it just pushing back snow banks seemed pretty smooth.

For the batwing mower I love the self returning remotes I can give it a quick little tap when I needed it lifted and same thing when lowered. I had a non return detent on my 111 I got dealer to swap it out just about ripped it off when in a hurry to lift or lower the mower I think it all...

Sounds like a heck of a deal as long as it not bent, not too much can go wrong with a blade even with some paint you could prob make a good buck or two selling it if need be. Good luck

I mean I guess you could the price is right. But I’m thinking it’s still gonna be too much for the bx. The 26 series is beefier and I believe taller moldboard. But to answer your question no it should hook to your tractor unless someone fabricated the blade to go to cat 2 or 3.

I have had a bunch of sub compact and compact sized tractors, and for and all around tire the r14 have been so good. I mean in deep snow, mud and ice,chains are your best friend. I wouldn’t buy a new smaller tractor without r14 that my opinion.

Sounds like normal operation to me. When your lifting the loader it’s drawing from your hydraulic pump which in turn will put load on your engine especially at lower rpms. If your at end of the rams stroke or full lift there is no where to fluid to go it’s dead heading and you will really...

I have a westward tiller, I keep soil tilled so I run a forward rotation on my Lx it’s a 6ft. It’s a gear drive with slip clutch. weighs 600 pounds I find I heavier the rototiller the better less bouncing. I paid $3000cnd. I looked at land pride but just couldn’t justify $5800 for the...

My remotes did that as well. Wish the male thread stuck through the mounting hole bracket and the female coupler would have held it in place. Seems stupid to me but oh well

Run the joystick through the motions while boot is lifted up. I know it’s not problem but just make sure hydraulic couples are attached properly

Sounds like it would be something in joystick/loader valve. Lift up that rubber boot over the joystick see if anything looks out of place. Pain in the butt but tractor will be on warranty still at least

I have 2.5” on mine. Definitely night and day difference. My suggestion if your using your tractor any any slopes fill your back tires even half full keep the centre of gravity down.

No problem they are absolutely worth it

Thank you 👍

Ya my fix it ego says buy a saw you can most likely fix and tune yourself the other part says would it not be nice to pick up a saw -20 or plus 20 and it be set ready to go for you 👍

Thank you for the reply. Has the auto tune or Mtronic system gave you any trouble?

So I had an a lx3310 and now a lx3520 bolt pattern and hub are same so if you buy spacers for any Lx 10 or 20 series they will fit. I have 2.5” on mine helps a ton even that. Only thing to watch out for is if your have a mid mount mower dont believe their compatible. Mine are bro tek brand

Dad has a homelite smaller saw 45cc maybe. Things still pulls hard 3/8 chain on it. Damn thing makes my hands numb though haha

Excatly 😂

So from all the replies back and what I read I’ll just buy one of each 😂. Can’t go wrong and I’m sure the wife will appreciate that

It truly depends what I’m doing with tractor. I find my lx3520 to be a little hard on fuel but could be just me and it may get better as it breaks in that’s a 4cyl turbo 1.5L. My 108s 3.8L gear drive is sooo good on fuel even if I’m pushing snow or dragging a batwing around. But that...