Search results

If you get a chance to quote truck freight to a commercial address in 13057, id appreciate it. I am getting a quote from messicks for a new one. Feel free to PM me if you need more info, appreciate your time and effort!

Do you have a folding ROPS assembly for a BX2370 to 2670? Not sure if shipping would be feasible but I am in 13084. I can have it shipped to work which is a commercial address at 13057.

Kubota part 1J080-12320 might be what you need? 2nd link is something similar, the part from messicks does not have a picture, but I believe it adapts the turbocharger outlet to the same 4 bolt flange as the exhaust manifold. https://www.messicks.com/parts/kubota/1j080-12320...

Sent you a PM

Its hard to beat the fit and finish of the Kubota kit. My LX2610SU has both the kubota 3rd function kit and the Kubota rear remotes (Plus the backhoe too)

We have had this one at work for a few years, we have it rigged up on the front of skid steer. It works really well and does not require a lot of maintenance , we only use bagged salt in it, no sand...

I have had my LX2610SU for 3 years now, I picked up an older 60" Everything Attachments box blade last week that was sitting on a local dealers lot for $650. Used it some over the weekend and I really regret not getting one sooner. I jumped on a top and tilt setup this morning, should be quite...

Definitely been wild here. We were supposed to go to a restaurant in Rome last night for my wife's birthday that is 300 yards from ground zero 😳. Ef2 tornado confirmed 135mph winds. It even made the B52 at the old griffiss air force base fly again, moved it off its display platform...

Glad to see you went with the redline forks. I like seeing the small companies get a piece of the pie. I have the same set for my LX (Even though they are marketed to the BX, they are perfect for the LX as well). I have been eyeing their rock bucket too. I had them shipped to my workplace which...

I love my 2 Kubotas, but that being said, there is alot of tractor competition in my area. For my next purchase (likely a replacement for the BX when the LX is paid off), I would consider kubota, deere, massey ferguson, and New Holland. Here in upstate ny, all have dealers with good reputations.

Difference in MSRP is pretty substantial, around $3500.

Lots of options for blades, if you are getting a loader, the most economical way to go would probably be to get the skid steer quick attach, then you can take the bucket off and put the blade on the loader, a snow pusher (Kind of like a boxblade) for the front might be a good option as well

Bx1880 sounds like a good match for you, shouldn't be much of a lead time if any, bx and the loader should be readily available. Loaders don't typically work well for snow removal, get a blade you can angle and you will be much happier.

We had the premium plan from nationwide on both of our pugs up until they were 5. My wife used the heck out of it and we definitely made out well with it, but it rises exponentially after 5 and she changed to another one. I'm not sure which one we have now, we mostly just have it for accidental...

When the Gravely came out it was a Polaris Ranger with unique bodywork, I believe both Gravely and bobcat utvs are just rebadged rangers

Land pride makes a top and tilt kit for the LX https://www.messicks.com/parts/landpride/320-166a

Now that I think about it, My LX has the relays for the 3rd function bolted to the fuel tank shield in the engine compartment. Really the engine heat isn't going to hurt a fuse panel any, I have worked on equipment with fuses and relays in far hotter environments.

I added inline fuse holders to the starter positive battery terminal and ran the wiring into the dash panel, I removed steering wheel and the dash panel came off easily. I only had 1 relay and there was plenty of room for it in the dash panel and there was room for several if I remember...

The Woodmax FM-54 would probably be a good match. I have an FM-62H for my LX2610 that is only 19 PTO HP and it runs it very well.

I bought my LX2610 from a Kubota dealer well north of me, its only a Kubota dealer and thats all they have done since Ford tractors sold out to NH. If that Kubota dealer was not available, I would probably have gone with a Massey. We have a very reputable Massey dealer in Central NY that is...