Search results

Thank you for the pointers guys. It helped me get thinking about where I could have gone wrong, and was just about to take the pan cover off when I noticed the charge pump cover on the bottom has a dot on one side. I went back and looked at some pictures I took from the tear down, and sure...

There is definitely resistance in the wheels. I can't push it forward without pulling the neutral or free wheel lever. There's also no external filter on this hydro, only an internal that's not serviceable without removing the bottom cover. When trying to purge the air, while the free wheel...

I tried doing the air purge method husqvarna and JD use for their HST's (couldn't find one for kubota), and I can get some of the air worked through. Hold the neutral switch, push pedal forward, reverse, repeat X times. Then release neutral switch and try moving. There is some tire movement, but...

I rebuilt my HST, a lot of new internals and took pretty good care to get everything back together the way it came apart (mostly only one way it can go together). I put new o-rings on, which was only a hand full. The pedal rod is connected to the HST and I can see it actuate the arm on the HST...

I have the same tractor. Hopefully these diagrams help.

https://www.messicks.com/ku/84465?sectionId=214710&diagramId=323336 Item 30? $200, part number 6C040-54410

The flange bearing needs to be replaced on my TG1860G HST. It's part 235 in the diagram. It is pressed in there very well. Any ideas on how to remove it, and put a new one back? The flange broke off with the bearing portion left inside the axle tube (so the axle is still properly supported on...

Thanks for the link RCW, I can't believe I didn't find that in my searches. It looks like messicks carries a lot of parts. D2Cat, I'm in the upper midwest. Shipping a transmission unit would probably be expensive, but maybe worth it if I priced out everything I need. I'll have to do some...

I picked up a TG1860G that has a leaky HST and a bit of whine/hesitation. I'm looking for part number(s) for rebuilding with all new seals, but can't seem to find any references or even diagrams. Do they make rebuild kits for these or does every piece need to be ordered individually? If anyone...