Search results

They are great tractors and it will impress you with what it will do. Are you getting the brush guard if so a piece of expanded metal on the lower part will make you happy when using the grapple extra piece of mind when using it to stack up brush

I have the titans now but they are have had some holes from where I tore a barn down and I’m tired of plugging them. If I can save 120 bucks I’m going to.

27x8.50 15

Anyone running the Carlisle Trac Chief tires on their tractor ? Only $90 off Amazon compared to 150 for the titans.

It was explained to me by the dealer that anything you do to the tractor or anyplace it happens is covered. Which is why it’s a better option than homeowners insurance. So after reading some of these comments pretty sure some of you just look at your tractors. So by using my tractor with a...

Its$250. I'm not going to turn it in until.i get all the barn put into dumpsters so if there is more damage I get it all covered. I was told that they covered any damage. We will see I guess

Just cut 2 acres with 3901 hst with 6 foot rotary. Put it in low 2500 rpm and got the deck up pretty high and no problem. Took me about an hour and a half the grass was over the hood of the tractor. I did snap 4 shear bolts but that's a couple bucks.

I found some chunks of lead that I add when needed. 4 block plus a 60 inch areator was all my 3pt wanted had to take the 5th block off

Been tearing down my barn and the grill , headlights, and hood have taken some abuse

Going to be using my insurance and was wondering if I actually had to bring it in to the dealer or do they just send you the parts if it's something simple?

1/4 plate should be fine what I'm doing mine on. I've done them out of 3/8 Before on 10k skid steers pushing much bigger plows. Going to have to experiment with how much snow you cab push at a time with your tractor if you get to much it will walk your plow out of what your going to try and...

You should be fine taking the loader off I had 1000+ pounds of lead on a 60 inch areator with the loader on and the front end was a little light but you have a heavier tractor with less weight.

If it was me I'd make the mount push from the draw bar on the back of the tractor. Might be a winter part of the tractor and take it off in the spring but definitely the best place to push from since it isn't a framed tractor

I have done a couple central hydraulic systems with boss plows very easy and a nice plow to use for them. Could make it work off your loader control very easy. Only thing you would need is a cross over relief valves which are 85 bucks off of Amazon.

I run a 1672 on my 3901 I mow about 6.5 acres for a year now and it's a beast. I just recently started mowing my neighbors field this past summer with it instead of the Bush hog and I have been impressed last weekend it was probably close to 14 inches and I just put the tractor in low and went...

I put 2 54 watt forward facing and 2 18 watt led facing rear an it is awesome. I've been using the Cree led lights on plow trucks I build for people for about 3 years and not a single problem yet well worth the money. Did a 60 inch on the front of a customer's combine and he has been happy with it.

If you can fallow simple instructions buy the w.r. long kit and install it your self for the 3rd function. I did mine this past fall on my 3901 only took about an hour maybe an hour and a half

Are you running all led if so you got some serious stuff going on I think I'm at 9 amps

Here is a pic of them this evening in the dark work pretty good for $30 off Amazon

If you can when cleaning the radiator clean it from the inside out do debris is taking the same path as it goes in. Check the fins on the radiator make sure someone didn't take a pressure washer to it and fold the fins over so air can't get between the coils