Search results

Thanks to all for your advice, insight, drawings, and general help. I did the troubleshooting and discovered it was the ignition switch. There was no power to the switch in the run position. I replaced the switch today and I’m happy to report that it starts and runs. Now I need to work on the...

When I spoke to the folks at the Kubota dealership, they said if the tractor was starting, even briefly, that the ignition switch was not the problem. Do you have reasons to believe it is the ignition switch?

It will run as long as I hold the key in the start position. It runs smooth. I didn’t cut the fuel filter open but the water/fuel separator had some gunk in it. I cleaned it thoroughly. One theory is that some of the fuel has gelled at the injector. I don’t know if I can tell if it sounds...

Ok, I’ve verified that the ignition switch is not the culprit. I’ve visited my local Kubota shop and they seem to think it’s a fuel issue. Possibly a clogged injector. Anyone experienced this and possibly fixed it?

Thanks for your insight. By “main switch” do you think it could be the ignition switch?

I’ve been through several threads and I don’t think I found the solution. I’ve cleaned the fuel/water, separator, and replaced the fuel filter. I have ensured there is no air in the system. I’ve confirmed that I have fuel going through the fuel pump. The tractor cranks, starts briefly, when I...