Search results

  1. Sawdust&Shavings

    Kubota l245dt engine upgrade after going swimming

    I agree the clutch isn’t being used and a hydrostatic would be the best choice. My problem is, what was wrong with the steering wheel…why wasn’t it used?
  2. Sawdust&Shavings

    What's cookin' boys?

    Glad you didn’t eat the bacon. The term “cured” is no guarantee it’s safe to consume. On the one hand, I “cure“ pork bellies for 7 to 14 days (depending on thickness) and then smoke the bellies…but we don’t eat the bacon be before it’s been smoked (or cooked). On the other hand, I’ll make...
  3. Sawdust&Shavings

    What's cookin' boys?

    Cut each slice into thirds and deep fry it in duck fat for 15 seconds…your heart won’t thank you but your taste buds will.
  4. Sawdust&Shavings

    Removing Tie Rods on BX1880

    https://bxtractorparts.com/shop/ols/products/bx-inner-outer-tie-rod-boots My OEM boots didn’t last 2 years, I bought the four boots from bx tractor parts and they still look new.
  5. Sawdust&Shavings

    Which do you use more?

    Pallet forks.
  6. Sawdust&Shavings

    Loader bucket or snow pusher

    I can easily move dry snow up to 12” with my BX2767 five foot blade on my BX1870, swaps out with the bucket, attaching to the loader arms. I manually adjust the angle of the blade (left or right) but it came with holes predrilled for hydraulic cylinder. I have eight 47-pound suitcase weights...
  7. Sawdust&Shavings

    Everything on Everything Attachments

    Sounds like you are Living the Dream.
  8. Sawdust&Shavings

    HST creeping adjustment issue

    You’re welcome; the OM says to grease it every 50 hours…I prefer to grease it at the FEL frequency of every 10 hours, I have found that if I wait until 50 hours my BX creeps forward ever so slightly.
  9. Sawdust&Shavings

    HST creeping adjustment issue

    May I suggest greasing the treadle pedal…it might fix your proble.
  10. Sawdust&Shavings

    BX23 3-Point Gauge

    I believe he uses it as a handle to adjust his top link length.
  11. Sawdust&Shavings

    BX2380 mower deck won’t lock out on “top”

    How close to the recommended “L” measurement did you achieve? See attachment, the range is small.
  12. Sawdust&Shavings

    BX2380 mower deck won’t lock out on “top”

    Try to adjust it again, normally a very small of adjustment (-1/4 turn) is all that is needed.
  13. Sawdust&Shavings

    MMM BX80 Question

    My best ”guess” is that the BX1880 may not support the drive over deck feature of the other BXs.
  14. Sawdust&Shavings

    MMM BX80 Question

    The BX1880 can only use the smaller of the two MMM decks: 48” or 54”. Kubota USA website pdf (1 page attached) downloaded just now lists the options for non-drive over MMM decks.
  15. Sawdust&Shavings

    Mower blades

    It does in my world
  16. Sawdust&Shavings

    BX2360 Tie Rod Boots

    I replaced mine with ones from bx tractor parts 10+ years ago and they still lol like new. https://bxtractorparts.com/shop/ols/products/bx-fuel-filter-relocation
  17. Sawdust&Shavings

    BX2380 engine / fuel issue?

    You might still have air in the fuel lines; turn the key to on (not start) to give the fuel time to bleed the air out if the fuel lines. There is a slim chance that with “All my clamps are off the hoses …” that air is being introduced at one or more if the six fuel hose clamps.
  18. Sawdust&Shavings

    B2601 losing power in reverse?

    Your seat switch may be working now…wouldn’t hurt to check it.