Search results

The wear edges are consumable items, no way around that. That's why they're replaceable. There's choices of materials depending the needs and wants from a wear edge and cost- the most common are steel, rubber, polyurethane, and UHMW. My preference is UHMW as it's very long lasting and doesn't...

I did miss the link the first time- the bold helps.

My feedback would be that you need to re-upload your video in higher quality. 480 isn't good enough these days. Also have your video linked on the product's page so people don't have to hunt for it to see how it works.

I personally wouldn't have an issue with the grinder touching the shaft here and there during grinding of the exposed machine key as that's not where the critical clamping surface area is. I just thought of something. When you're threading in the screws that will be performing the pushing, use...

If you wanted to buy a replacement bushing, I believe this should fit. Verify the measurements before purchasing. https://www.mcmaster.com/6086K195/ It doesn't look like Kubota sells the bushing by itself, only the combo with the sprocket.

Use an angle grinder to grind the existing key flush with the shaft before you use the screws to push the hub off. Lubricate the threads of the screws so they don't seize on you.

Agreed. Also most likely the metal is a bit scored so it's going to be a bit of effort to get it off. Be prepared with a small 3-jaw puller to get the hub off all the way.

It's an RBL split taper bushing. The split is on the back side.

Was it four holes or three?

I watched a Mustie1 video recently of a very similar issue and his troubleshooting steps along the way. He (sorta) figures out what's going on at the 1 hour mark. It's a good troubleshooting process to follow to determine if your issue is at the starter/starter solenoid, ignition switch, or...

Found this- Shouldn't matter which way the collar is rotated, there's a ramp in both directions. Found this picture of someone's yoke with the collar off- If you have no plans on keeping the PTO shaft, cut the outer wheel off and start working on getting the balls loose. Maybe even punch...

Looks like the other end has the same style. Could you examine that end to see how it works?

When sitting pretty much stationary in a cold cab before the interior has heated up, anything helps.

How is the search done without a login/account? https://www.keagenuineparts.kubotaengine.com/

You could test this using your existing home thermostat and the hot spot function on your cell phone. Enable your phone's hot spot, connect the t-stat to the phone, and perform your testing from there. One thing you'll need to watch for is that there may be an inactivity period where the hot...

I'm going to do the same thing as what this person did-

It's correct. You can see the same thing here-

Project Farm did the same testing five years ago.

I ordered this one last night. Single pad kit with a 3 position rocker. https://www.amazon.com/dp/B084YXXM2P

Anyone use a heated seat pad for their tractor seat that they'd recommend?