Search results

Sold

TTT

TTT

TTT

I would take $800 at this point, need the room.

Land pride 3 point RB1672 rear blade. Bought it new Nov 2018 and used once to move some snow, about 2 hours. Stored inside heated/cooled building. Like new. $800 must pick up. Exmore, Va. 23350 Thanks!

So I haven't had much of a chance to get on here but the issue with my tractor was the hydrostatic safety switch. The securing nut had loosened cocking the switch just out of line with the rod so it wasn't actuating it. Hard to see up there. Thanks to all who posted. Dave

Still waiting on it. Out of all the wiring diagrams online I cannot find one for my tractor. I can jump the black and white wire coming from the key switch at the controller plug with the black and yellow gong to the starter right beside it and starter engages. So something is telling the...

Well that didn't work.

So while I was waiting on the service manual to show up I decided to do a little more investigating on this issue. I pulled the dash assy to probe the key switch control wire and found 12v present. Looking around under there I spy this small black box with a 10 pin connector. I later found out...

Mark is being funny.....Service manual is on the way. I am not a parts changer. Its more than likely a safety switch, likely the clutch switch adjustment.

Correct, a run switch & a start switch. Both jumped out they are not the issue. I have not had time to jump out the hydro & PTO switches just yet. I am thinking one of them is the problem. Thank you for the responses. I am ordering a FSM tomorrow. After 16 years I guess I will need one.

precisely

Thank you for that information will do!

Are there wiring diagrams posted here?

Battery is perfectly fine, I can bypass the starter solenoid and it cranks fast. Tractor is immaculate and is stored in my climate controlled building since I bought it new.

So I cut our 4 acres today with my 2006 B7800. Shut it down for an hour for lunch. Went to start it again to wash out the deck and nothing. Fuel solenoid clicks but no starter engagement. First time in 16 years this has ever happened. So I am thinking one of the safety switches must be the...

Nope

So I've noticed my RC72-27BA belly mower on my 2006 B7800 is leaving a few stick ups as of late causing me to cut twice. Blades are correct Kubota and are 1 year old. Is there a high lift blade available or is what I have the only blades available? See if I can find the part number.

I tried to back off of the deck but couldn't keep the wheels chocked. I am on concrete as well. I just set wheels to lowest setting, steer fully to right (I think) and pull it out from left side. It may work as ownwers manual states if I could keep the deck from moving.