Search results

Hugo, it looks just like my dipstick. I keep mine at the blue mark line. Unsure bout tightness as mine fits snug. You could replace it or maybe try heat to swell it some for a tighter fit. It does look like a different one in manual, but I think that was just for illustration or we have the...

My guess is it sold locally. 22R

Very well laid out and thought provoking for OP to read. Situation does suck but at this point they are logical steps that may help. Best of luck to OP. 22R

Although it would not be right IMO I wonder if they are saying he was the original owner? Does Kubota warranty transfer with change of ownership? I would think so. Contact your local news station and have em march into the dealer with the cameras rolling and they may decide to assist...... Do...

On what grounds are they denying if it has a Lifetime Warranty? 22R

If you can make one, Make two 😊 be sure to post pics when done 22R

Congratulations! Nice shape. Be sure to check out drive shaft U joints and make sure HST fan is not sloppy. You can research my post as I have a G1900 that I use as a backup and I did some rehabbing too but looks to be in about same shape as yours. I just got a 3 point hitch for mine but I need...

Sorry for the loss of your Dad Kristen, He sure knew how to take care of his stuff. Does your Mom still have grass to cut? I would make a swap for a 92 G1900 Baby Bota if she is interested. It is almost as nice as your Dad's with about the same hours on the 18HP diesel engine 22R

i agree I always thought it was a bypass till I read it was fusable link. Messicks may can tell ya if you email or call them. 22R

And BTW I think I put the cable wrap on the leads when I replaced both pos n negs a few years ago.

Hi Hugo unsure how pics will come out but mine the positve routs back from post away from exhaust and zip tied to frame in a couple spots. It goes slightly pass the starter terminal then loops back around to it and attaches at the starter terminal. Pay no attention to the small black box that is...

I have a 19 year old Honda EU3000 it still looks new. I use it for Hurricane storm outages to back feed my house. It powers both Fridges a 5K window unit and a few lights at a time. It handles load fine unless two compressors kick on at once. It uses about 3 gals of gas running 13-14 hours. I...

Appreciate all the replies guys. Posting this in case someone else goes down this road with a G series in the future. Annette at Kubota and Julie at Coleman Equipment was of no assistance and did not even try to look up anything. Nate at Messicks however confirmed that you need PN G2593 to go...

Thanks for your response Mr Moots. I am thinking along the same lines about adding valves or just teeing in but I am going to wait a bit and see if I can locate what I need that you referenced above. It just amazes me with all the searching and info out there on the G1900 nothing alludes to...

Guess I am outta luck. I contacted Kubota CS and they told me they cannot answer the question. Told me buy a service manual maybe that would help. Sure changed my view of Kubota. 22R

Wow 6000 hrs. That is amazing. The good thing is you can still get a lot of Kubota parts for these machines the bad thing is Kubota parts are very expensive:(. Pace yourself and enjoy. Post some pics when you can. 22R

Thanks for your input.

Thanks for your reply.

If you would read through this thread and give me any experience you may have on the subject. You can reply to either thread if you would please. Thanks, G1900 3 point hitch seekers Public Service Announcement | OrangeTractorTalks - Everything Kubota

This is two shots of the inner side thst the instructions show to install the supplied fitting. Where it looks like it goes there is no fitting just a spot where one may have been intended to go. Thanks Moots for your reply