Search results

  1. A

    3301 Top & TILT KIT #

    Howdy folks , I picked up a T&T kit for my 3301 from a member here & wondering if someone can point me towards the part # for the Kubota T & T kit so I can see if I can find a manual for the kit . Pretty sure I have it covered for the install just wonderin if theres any mention about using the...
  2. A

    Messicks TNT kit for L3301 ?'s

    Thanks folks , Tarmy I " PM'd " you thanks animal
  3. A

    Messicks TNT kit for L3301 ?'s

    Hey folks , I'm looking at a TnT kit from Messicks for my l3301 HST tractor . Has anyone here got one ? Is the travel of the supplied rams suitable for these tractors ?Looking at the pic it doesn't look like the hoses are very long ? The kit does not come with the valve or the hoses to the valve...
  4. A

    Skidding Winch Recommendation

    Thanks animals45
  5. A

    Skidding Winch Recommendation

    looks like it belongs there , what's it weigh ? animnal45
  6. A

    Skidding Winch Recommendation

    I have a old warn 10000 or maybe 12000 off my old 1 ton service truck , thinkin out loud bout can I loose all the cable & make a capstan winch out of it . Don't want to hijack this thread , so I'll start one thanks animal
  7. A

    Skidding Winch Recommendation

    SO are all these skidding winches , Capstan winches ? animal
  8. A

    BX2750D Snowblower Fan Shear Bolt

    does the fan move in & out on the shaft ? Ya may have to have someone turn the input while ya slide the fan in & out . animals45
  9. A

    M7060 Pallet Forks Question

    the guy that's askin if they fit his tractor . animals45
  10. A

    LX2963 snowblower issues

    Nope my Bolens ain't going nowhere . Can ya get a video from the front as it's being operated ? I agree with nbryan it sure looks to me from what I can see in the vid is the the one side is just being pushed while the other side seems to be feeding fine . How much are ya getting out of the...
  11. A

    M7060 Pallet Forks Question

    DO ya have a SSQA for yer loader bucket ? animals45
  12. A

    Shear bolt caught under impeller, solved but...any easier solutions?

    I buy a box of regular 5/16 bolts at the hardware store the proper length & another box of the locking aircraft nuts . I have never in over 30 years lost a bolt due to the nut coming loose . As far as getting that bolt out thats just part of snowblowin , wait till ya get a broken one stuck...
  13. A

    Woodland Mills WG24 Stump Grinder

    I don't know oif this helps or would even work . I remember reading about Deeprock the diy well drilling kit maker used to sell cans of carbide that ya would heat up the drill bit till red hot & put in the carbide can & that recoated the drill bit & get back to drilling . animal
  14. A

    Long bushing for Cat 2 lift arms to mount Cat 1 implements?

    Is this with all attachments ? Are the lift arms adjusted properly ? animals45
  15. A

    best 3-point quick hitch?

    I bought a used one from Harbor freight . I replaced the top hook with one from Amazon & bought a handfull of cat 2 to cat 1 reducing bushings from Tractor supply . Works fine on my 3301 . animals45
  16. A

    L3301HST Power steering

    Bucket was empty . I was pulling into my shop to lift my lathe & I couldn't turn the wheel to make the turn . I tried backing up & turning & still nothing , I would try to turn the steering wheel & it would turn maybe 5 degrees which is the play in the system & then it would feel like I had hit...
  17. A

    L3301HST Power steering

    Hydraulic fluid is fine . I need to go through my box & see my any of my pressure gages go hi enough to do the pressure test . thanks animals45
  18. A

    L3301HST Power steering

    My power steering started feelin like it wasn't workin yesterday . if I gave it a bit more throttle it started feeling better . It hasn't done that in the past . I went all through the FSM & owners man & I can't find anywhere a power steering pump or reservoir anywhere . I can find mention of a...
  19. A

    HST tractor back wheel neutral ?

    Good deal , Yea , it is in 4wd , I should have thought to take it out . I didn't know if the valving had anything to do with the wheel moving or not . thanks animals45
  20. A

    HST tractor back wheel neutral ?

    I have a l3301 HST & noticed yesterday that with one wheel off the ground & can not rotate the wheel . I have the H-M-L lever in neutral & the foot pedal in the neutral position . Is there some way to have the back wheels freewheel ? I am at the stage where I need to readjust my chains for...