Search results

One for sale in Texas under implements just what you want tractor destroyed in fire

Yes the arms have to be removed

I agree grease is cheaper than new pins and bushings and whole lot easier to install!!!

They are great. my neighbor and I have the 12 kw ones. We have used them through several hurricanes and ice storms. One tractor is a B3200 and other L3800.

I used a 45 angle on the fixed or ridged hose which angled it up and to the right just enough to make everything clear

Will you pm me with your number

Yup agree with Dav but is it a HST or gear drive? I buy off eBay normally you can find OEM Kubota dealers selling complete filter kits. Only one not included is the inner air filter this is a option I highly recommend. My opinion is only Kubota brand filters and super udt2. Yes the udt2 is...

20” trailer and two 5200 axles with braces on both. You will have enough trailer for the future. I started with a 7,000 gross 16” now have a 24 flat 3” dove tail goose neck with two 7,000 axles 14,000 gross that I built. I know it is over kill for a L3800 but you will be surprised what you will...

What I have is a 12kw which is 24pto hp at max output and run it with a L3800 which is 30pto also my neighbor has same generator with a B3200 which is 24pto both tractors do good however you can hear the tractor “load up“ as you increase the load on the generator. I know I didn’t answer your...

I second the seat switch or operator present switch under the left side of the seat

Not sure on the seat. I had a BH7500 on a L3700SU and it used a sub frame. Your tractor is the larger frame size but be careful with the top link. There all kinds of stories about the 3pt hitch top link being ripped out.

As others said you will better off with weight on the 3pth. It acts like a see saw the weight behind the rear wheels will remove some of the weight or load add to the front axle by the loader. I chose this instead of loaded tires. Every one‘s application is different and if you have no intention...

Does anyone have a B3200 with a mmm and loader installed? If so would you post or send me pictures of the mounts. My neighbor just bought a loader for his I was thinking the loader frame would have the mower brackets made on it, not sure if you use the current mower brackets on top of the loader...

Does the 504 on a B3200 use the same quick attach as the 524 on the L3800

What I did was take out the little window (22mm wrench if I remember correctly) slowly filled till it ran out replaced the window and added very slow until the oil was half way.

They are great tractors Dad had a 530 construction king when I was growing up. What I learned to load dirt with.

I agree 60 or nothing might even look at 66***8221; box blade

Can you grind a little off each side of the ball so it will be narrower?

Second the shop vacuum works great

Also check eBay I found them there several dealers sell there.