Search results

  1. M

    BX2200D Won't stay running

    They have a fuel shutoff solenoid that requires power to hold it open. As soon as it looses power i.e. turning the key switch the solenoid shuts off fuel flow. So while you definitely need to get a battery, once you do you'll want to check the charging circuit as well as I assume that's what was...
  2. M

    B7100 Ignition Fuse Blowing Immediately

    Check the big white connector that connects the dash side harness to the engine side harness. It's right there where the fuses are under panel right side. I've had a few of those get brittle or have broken plastic and they ground out
  3. M

    B7100 rear half on a b6000

    Awesome. Thank you for that link.
  4. M

    How Badly Did I Break It

    Depending on what you did to cause it its very possible you could just replace the cover and go. Like Wolfman said if the pto shaft was too long and it shoved it in then your likely to have case and possibly differential damage as well. Had a customer a couple weeks ago do that. If you need...
  5. M

    B7100 rear half on a b6000

    Had a customer want to buy a rear half of a b7100d. Apparently his local dealer told him you could bolt the rear half of a 7100 onto a b6000 and resolve the non standard pto issue of the b6000. I've been looking through diagrams and comparing part numbers, I don't believe it will work but not...
  6. M

    B2400 fuel line

    Yes 5/6 (8mm) is correct
  7. M

    B2400 fuel line

    Pretty sure it's 5/16 but I'll check mine and see
  8. M

    Kubota B series salvage yard

    Of course
  9. M

    B7100 Pilot Bushing Help - Grinding Gears

    Do you feel vibration when you depress the clutch pedal. Worn out bushing can cause it not to be able to switch gears while stationary (not made to switch while moving but that's already been covered). What happens is the bushing keeps the shaft straight. When that is worn now your shaft can...
  10. M

    Let's talk B7100 hydraulic lift controls

    Sorry I do not. Thank you
  11. M

    Kubota B series salvage yard

    Thank you for your interest. Unfortunately not much of anything from a 7100 will fit an 8200. Sheet metal is all different. 7100 doesn't have position control lift. I do have a b5200 I will look at those parts and see if maybe they are the same but I probably won't really have anything for the 8200.
  12. M

    Let's talk B7100 hydraulic lift controls

    Good evening. I have several b6100/7100 parts tractors. Send me a message if I can help.you in any way. Thank you
  13. M

    WTB Kubota B6000 4wd in/near Indiana

    B6100/7100 would be a far better choice and only inches difference in size. There is always the 5100 if you have to have the 2 cylinder. 1550/1750 is basically a b7100 but with actual water pump, few more hp and power steering option but they are a little bigger like the 7100hst
  14. M

    Kubota B series salvage yard

    I do. Are you looking for front and rear? On the rear are you wanting the skinny ag tires or wide? Thank you
  15. M

    Kubota B series salvage yard

    I have one. I'm sending you a message
  16. M

    Kubota B series salvage yard

    No sorry i don't have any buckets at all right now. Thank you
  17. M

    Kubota B series salvage yard

    I do have brackets for a b2400 but not for a b7100. I'll send you a message
  18. M

    Kubota B series salvage yard

    I do not. But look on Facebook marketplace there is a guy in rockmart GA that has one listed pretty cheap
  19. M

    Kubota B series salvage yard

    Good idea. Thank you