Search results

Thank you sir for taking the time! And if you don't mind, where'd you find the schematic?

I ordered all the filters for my B8200 and I read somewhere that if i change the fuel filter, I have to bleed the fuel system afterwards. Can anyone tell me what the procedure is for that, I don't see in in the owners manual. Thank you!

Hello, they are currently on my machine. If you find the correct set of turf or industrials for an 8200, let me know and maybe we can swap. Otherwise I have to hold on to them, they are working good for not tearing up my lawn when I mow. Thanks

Maybe something like this? https://betstco.com/product/37-rotary-garden-tiller-fh-tl95/

Any thoughts on forward or reverse rotation?

I have a Kubota B8200 and I'd like to get a used rototiller for it but I'm not sure what to look for. Forward or reverse rotation? full 60" width or smaller offset? Whatever else? Any insight appreciated. Thanks

Is there anything I should look out for or monitor to make sure these tires aren't damaging anything? I'm assuming it might be a little like driving a 4WD truck on dry pavement, you'll feel binding when you turn or something like that? Thanks for all the info!

I didn't catch that the tire specs compared to the ones I want to by didn't post. Here they are again: Tractor data Spec Diameter front 24X8.50-12 23.6 Rear 13.6-16 38.4 Used tires Diameter 20.5x8-10 20.5 31x13.5-15 31.5 How much of a ratio...

thank you for the info! I did t think an inch or two smaller would make much difference? All I’m doing with the tractor is mowing a couple acres. Money’s tight and the used tires and rims in good condition are $350 compared to new ones that would cost $3,000. I‘ve been looking for months...

It is 4wd. what do I do with the RC? Can I figure it out with this info: Spec from tractor data Diameter Used tires for sale Diameter 24X8.50-12 23.6 20.5x8-10 20.5 13.6-16 38.4 31x13.5-15 31.5 Does it make a difference if I will mostly be using 2wd and driving on lawn, not...

I have a B8200 and it runs a 4 foot rotary mower fine. I use it for the same thing, blackberry brambles.

I can get a deal on turf tires on rims. The sizes are: Fronts 20.5x8-10 Rears 31x13.5-15 And they reportedly came of a B7200. But tractor data says I need: Lawn/turf front: 24x8.5-12 Lawn/turf rear: 13.6-16 Can I still use these tires? Thanks!

I am just looking for implement performance. Most implements seem to be rated for 20 hp minimum and some of the deals on implements that I have recently picked up seem pretty heavy duty and I expect they would run better with a little more HP. So far I've gotten some good deals, a Land Pride...

Its a manual transmission. And I'm actually not sure if it has power steering or not. Steering doesn't seem difficult but I haven't looked to see if its powered are not. I'll check next time I'm in the barn.

This is my first tractor but I have an older Diesel truck, a 2000 Ford Excursion with a 7.3 diesel, and it seems like guys really like to build up their diesels and there's lots of aftermarket parts to get more performance. I was just wondering if there's anything similar for diesel tractors...

There seems to be some play in the steering, anyone know how to tighten it up?

Not having much luck Googling.

Prices might be lower in MI. If I listed this tractor on Craigslist and Facebook Marketplace for $5k it would be the least expense 4x4 tractor loader in New England by a couple thousand dollars.

Damn. I guess I should have taken a moment to read all the labels. I'll try it later and see how it works. Thank you!

There are seven hoses, two rows of three and then the one on the end.