Search results

  1. G

    10 Month MX Experience

    https://www.amazon.com/Radiator-Genie-Cleaning-Efficiency-Radiators/dp/B01NAU8J6D/ref=sr_1_1?crid=2DUEOW8Z9Y2WF&keywords=radiator+genie+water+and+air+cleaning+wands&qid=1695984274&sprefix=radiator+GENIE%2Caps%2C123&sr=8-1 This will clean your radiator.
  2. G

    Using QA pallet forks on 3PT

    I have that adaptor. It works good. I also have a hydraulic top link so I can adjust the angle. I use it for real heavy loads.
  3. G

    Pallet Fork Platform

    It is 12' wide. If I jump on a corner I can lift a back tire up. I put a counter weight on it.
  4. G

    Pallet Fork Platform

  5. G

    Pallet Fork Platform

  6. G

    Pallet Fork Platform

    I made a 4'x8' one out of 2x8 and plywood. I ratchet strap it to the loader. My wife got off the RH side and bumped the roll. I stayed on by hanging onto the railing.
  7. G

    Pallet Fork Platform

  8. G

    Pressure on Hydraulic lines

    I soon as I unhook the attachment I hook this up. There is air in the black pipe. Once in a while I open the ball valve to let the oil out.
  9. G

    Newbie Tractor Advice Needed?

    Are the loader arms bent? It looks like the bucket is not level. 4,000 hours is a lot if it has not been well cared for.
  10. G

    Cleaning a fuel tank without taking your tractor apart

    That is to big for my L4060. It does fit my ZD1211 zero turn.
  11. G

    L3902 vs L4802 in 2023

    If you are brush hogging up hill the brush hog uses most of the power so you don't have much left for the tractor. You end up slow up the hill. More HP would help a lot going uphill. I have a L4060 and a 12' finish mower. I can go about 1 1/2 mph up the hill. Luckily I can mow it sideways so I...
  12. G

    KUBOTA Pressure Increase kit

    I ordered one today.
  13. G

    Fuel issue

    On the L4060 there is a check valve in the cross over tube (#10) so it does empty the tank with the fill neck first.
  14. G

    3 point forks

    https://www.palletforks.com/tractors/3-point/adapters-and-mounting-plates/3-point-to-universal-quick-tach-adapter-skid-steer-tractor/136210.html
  15. G

    L4060 HSTC PTO takes a minute to disengage sometimes.

    This is where the check valve is.
  16. G

    ZD 326 Electrical problem

    Hook a light or other load to the wire that drops to zero. Then follow the wire with a voltmeter to see where it drops.
  17. G

    L4060 HSTC PTO takes a minute to disengage sometimes.

    Before I took out the check valve. At .4 hours the pressure was 340 PSI. At .6 hours the pressure was 600 PSI. The PTO would still shut off. At .7 hours the pressure was around 800 PSI. The PTO would not shut off. You can even shut off the engine and start and the PTO is engaged. Wait about 45...
  18. G

    L4060 HSTC PTO takes a minute to disengage sometimes.

    It goes to Zero in about 1 second. If the pressure is not way high. About 800PSI.
  19. G

    L4060 HSTC PTO takes a minute to disengage sometimes.

    Messick's said it is a Kubota knowledge article.
  20. G

    L4060 HSTC PTO takes a minute to disengage sometimes.

    The WSM does not mention high pressure. The only electric is 1 wire to turn on the solenoid. The rest is HST stuff.
Top Bottom