Search results

  1. P

    QA Adapter Plate Query

    Here's the standard layout, some mounts have additional pin holes:
  2. P

    BX2230 not starting

    Does it spin over or struggle? There have been instances where inadequate cranking speed have prevented starting.
  3. P

    L35 Husco hydro's

    There is no relief valve on the FEL control valve. When you refer to the inlet hose, I assume you mean the hose from the pump to the valve? And the outlet hose is the one back to the tank/transmission case? If so, the behavior is normal since the flow would be going out the power beyond hose -...
  4. P

    Vintage DeWalt RA Saw

    I don't know about BigPoppy's saw, but my BIL's was bought by his father in the mid-50's. "They don't make 'em like they used to".
  5. P

    SSQA compatibility

    Yes, although, as North Idaho Wolfman says, the grapple from a skid steer may be too heavy for your L35 to use effectively. Also, you may have to change the quick connectors on you hoses to a different style to match the rental grapple.
  6. P

    Vintage DeWalt RA Saw

    I'm not a motor expert at all. But once the motor starts, that relay takes the start circuit out of the picture. What saw do you have? Did the problem come on gradually or suddenly? Do you have a schematic to check the wiring? I'd check the contacts on any contactor or switch. Are you running a...
  7. P

    Hydraulic hose size

    Discount Hydraulic Hose has a good identification guide on their site. The threads on common JIC fittings are the same as UNF bolt threads, so I bought a 9/16 and 3/4 fine thread bolt and nut to use as gages for -06 and -08 fittings
  8. P

    What did you do to or on your Kubota today?

    If I understand your question, primer is just the solvents that soften the pipe. The glue is the solvents + some of the resin. The primer won't fill any gaps between the pipe and fittings, but the glue will.
  9. P

    Shop/Shed 30x60

    West end is finished. Just lack the rear.
  10. P

    Tractor advice for 40+ acers

    I'll put a plug in for my L35, I paid $14k a few years ago. The loader is non-removable, but the backhoe is. I've never used the 3ph since we have another tractor for mowing, grading, etc. But I think it would be fine with a 5' bush hog, tiller, etc. It's been very useful for maintaining trails...
  11. P

    Kubota LA481 Loader....I cannot find the replacement parts for it

    TheOldHokie is more than likely on the right path, but I see one small detail, I think. The end of the linkage with the adjustment should be perpendicular to the slot of the one with the fixed end. I have tried to show this with the blue line. As it is now, some side force is applied to that...
  12. P

    Kubota LA481 Loader....I cannot find the replacement parts for it

    I'm assuming you have a 3 pt hitch. Try lowering it a little bit. When did the problem begin? Was it sudden, or a gradual onset? Was something changed, added or removed just before this started?
  13. P

    Kubota LA481 Loader....I cannot find the replacement parts for it

    Messick's shows the seal parts in stock. You can probably get them from your dealer. I'm assuming it's leaking around the spool stem?
  14. P

    What did you do to or on your Kubota today?

    It was like that when I got it. I think the chains are more for boom swing and sag, neither pin is installed.
  15. P

    Shop/Shed 30x60

    The front and east end are essentially done. I've mounted the meter base and breaker panel. I need to find an electrician to tell me how to do the grounding and bonding to the utility's satisfaction. I've started siding on the west end. This corner is higher off the ground, so I've started...
  16. P

    What did you do to or on your Kubota today?

    Katy contributed to her new home. First, she moved the stack of siding to the other side of the floor so I don't have to carry it so far. Then she held the sheets up while I nailed.
  17. P

    LA525 Quick Attach

    None within 200 miles. I thought I had found one at a dealer, but "it goes with a tractor."
  18. P

    Shop/Shed 30x60

    Found it. They were pretty active around noon today.
  19. P

    LA525 Quick Attach

    Maybe you'll have better luck. I'm still looking for a 60 or 66" QA bucket.