Search results

I think so... I'll give it a go this weekend... thanks for your time and suggestions... SD

I think so... I'll give it a go this weekend... thanks for your time and suggestions... SD

Does it really matter? or am I stuck with it? Can it be modified somehow? I would think the ROP would be similar... but then again... Ahhh... that's what the JD means! crap! any way of modifying it? or am I SOL?

Do the Installation Instructions have "JD-018" on the first page? If so, that's it... although it says 1 1/2", that part is not true, unless they sent me the wrong parts! :(

Do the Installation Instructions have "JD-018" on the first page? If so, that's it... although it says 1 1/2", that part is not true, unless they sent me the wrong parts! :(

Thank you... never thought of that...

Two years ago, I purchased a canopy for my tractor; apparently the instructions are for a 2" X 3" ROP... The clamps for the "Receiver" don't fit... my ROP measures 1 1/2" X 3". The instructions say JD-018 at the top... I haven't a clue where I purchased it, who makes it, or how to jerry-rig...

No problem... contact Mike at BotaProducts or view on his website under products...

I have both BOTA fuel and HST mods...

Thank you so much... I'm a worrier and was really afraid to attempt it...

I have an older (2006) BX2350 with a BotaProducts mod which moves the HST filter to the left loader mount using hoses to connect from the transmission to the mod which consists of an adapter, which houses the actual filter. My questions are: When I remove the old filter from the adapter...

Watched lots of videos, some helped, most didn't apply; Don't have to worry about yard, only used for small jobs and tilling... thanks anyway...

You got that last sentence absolutely correct! I'll do the other tire tomorrow... Thank you for your time and comments.. SD

I have a Kubota BX2350; I just spend all day putting chains on 1 wheel! Makes me wonder if I would damage anything by leaving them on all year long? The tires are the ones with the knobs; I only use the tractor for small gardening (1.5 acres), rototilling and small jobs around the property...

Thank you... this is exactly what I was looking for... (y)

That's it? so what to do now? put on a dry gasket?

Already bought 2 tubes of the Permatex Gasket Maker stuff...

Hi again... so, I got the chain installed, along with the tension bar; it seems to be correctly installed. So, now I have to put the gasket on between the cover and the tiller. After many weeks, I finally got the gasket, seems to be made from some kind of thick gray oiled(?) paper. My...

Thanks to both you and Old_Paint... couldn't have done it without your input... I hope this helps someone else who is in the same position I was... the seller's staff were worthless except for the Parts Man (Rocky) who seems to be the only one in that company that knows what's going on...