Search results

Hi Dan, Just a follow up on the PB issue. Experience is everything. Received the P40G-PB sleeve last night. Works like it's supposed to. Imagine! The 1/2" BSPP male on the right angle adapter (Parker product) was fairly sloppy fitting into the SAE 10 female on the P40G but sealed perfectly...

My L3600 fit nicely with the backhoe or blower attached in an 8' x 20' x 8' Nice to not have to cover or brush off the snow.

Really good stuff Dan, I understand the concept. This makes sense. If I were to find this schematic and section I would say "hey that's not my valve" but it is. Just the way I absorb stuff. The way I learn best is by watching an example and seeing it work. All of my mentors are gone now...

Well Dan, I can thank you enough for the attention that you offer here. I know that the N port on the valve is a 1/2" BSPP. I ordered the sleeve this morning but wasn't sure why it would work. I constantly seek the engineering down to the last detail (which drives most people crazy) and this is...

Hi Dan, I appreciate the advice. I will look into the sleeve you mentioned. Best Regards, Jim

Hi Dave, Thanks for the input. I'm learning a lot but there's more to go. Jim

I have an L3600 with an LA680. A local Kubota Dealer installed a Bradco 509 backhoe about 10 years ago. The Power Beyond from the Loader block gets disconnected from the 3 point lift line (via quick connects) to power the Backhoe. Works great. The 3 point lift is disabled but isn't needed when...