Search results

  1. T

    BF300-A Loader - boom cylinder parts

    Oh i see, sorry i didnt see any parts diagram. I would suggest getting the info dan requested and go from there. He is a wizard when it comes to hydraulics. He helped me a great deal with my b1630 loader.... at 175 bucks a cylinder... its well worth the price to not have to source used parts.
  2. T

    BF300-A Loader - boom cylinder parts

    What is wrong with your boom cylinders that you are trying to replace them completely? If they are leaking, take the seals out of one of them and take them to a local hydraulic shop and have the seals matched up. I did this for my boom cylinders and total cost for both cylinders was a fraction...
  3. T

    L345DT Low Engine Oil Pressure

    75007, could you post a few pictures of what you did to add the oil pressure and temp guage? Im not a fan of only having indicator lights, gauges are very helpful to have.
  4. T

    B7200hst body panel alignment

    Yeah it just seems my panel is short. The exhaust lines up fine minus the part over top but it hits the oil filter at the bottom. I couldnt get both bolts to line up at the top unless i really pushed on it but even then the bottom didnt align correctly. Does the part down by the clutch pedal...
  5. T

    B7200hst body panel alignment

    All the photos help a great deal! Thank you! when i looked at the parts stuff on messicks, i didnt see that filler part you have pictured. Ill double check it. When i get home, ill see what bolt holes are where. It appears the 8200 panel is slightly longer than what i have and looks like the oil...
  6. T

    B7200hst body panel alignment

    When i purchased my tractor, it had a broken grille and a missing left body panel. I was able to order a new grille from messicks and found a left side panel on ebay.. i tried to put it on the tractor last week and it seems it doesnt align correctly. The grille went on fine but the panel seems...
  7. T

    B7100: Save or Part?

    You might be able to locate a running and driving tractor without the loader for a decent price and add the loader you already have. Im not exactly sure but i believe that loader fit other model's which might broaden your search. Im confident some on here knows what models it fit.
  8. T

    B1630 bucket replacement

    Is it a special bracket for the loader itself?
  9. T

    B1630 bucket replacement

    That quick attach setup is pretty slick, I like the pins. I contemplated doing the bobcat quick attach setup but i only use the bucket. I would imagine a pin on bucket would be easier to modify but i couldnt find one nearby that was in stock.
  10. T

    B1630 bucket replacement

    Hello all, The original bucket on my b1630 loader was at the end of the road. The previous owner i believe narrowed the bucket to 42 inches and was shy of useless with a badly worn edge. I found a 48" quick attach bucket at a local dealer for a bx series tractor and figured i would make it...
  11. T

    B7100 HST forward and reverse creep

    I have a b7200hst that does the same thing. I tried everything you did and still have the same problem. I suspected the spring as well but havent had a chance to put a bigger one in to try. I did blow out all the dust and tried spraying some lube oil on the contact points. It seemed to help...
  12. T

    Red Squirrels - Storing pine cones on motor & radiator :(

    I have heard of guys using irish spring bar soap as a deterrent for small rodents like mice. Not sure if it would work for squirrels. I use a squirlanator at home in socal and have good luck with trapping them but if your not on the property it might be an issue on getting them out of the trap...
  13. T

    B7200 body panel

    Well easy enough, messicks actually stocks that part still. It was 92 bucks.
  14. T

    B7200 body panel

    I located a body panel on ebay. Still in need of the grille if anyone has it. I may try to 3d print one and see if i can get that to work. Id rather not though if i dont have to
  15. T

    B7200 body panel

    I recently purchased a b7200hst a few months back and its missing the left body panel that covers the left side of the engine.. i would also be interested on the grille if at all possible. Hoping someone out there has a salvaged tractor they are parting out... not sure if other models used the...
  16. T

    Replace Glow Plugs B7500

    Oh okay, that clarifies things a little better. If the engine is cranking chances are its fine to just keep things simple. What is the background on this tractor? Did you just purchase it, was it a family heirloom thats been sitting for a long time until you started to get it going? What did...
  17. T

    Replace Glow Plugs B7500

    Just for clarification, can you further describe the issue you are having, when you say the engine doesnt turn over do you mean it doesnt start but cranks or nothing happens at all... If the issue is that it doesnt do anything, glow plugs would not be the problem. It possibly would be starter...
  18. T

    B7200 tach / hour meter

    Thank you for the info. Ill look into it sunday and see whats going on with it. I have a feeling its the gauge since its still metering hours fine. I dont use the pto for anything anyways. If i ever do... ill cross that bridge when i get to it i guess. I mainly just use a box scraper.
  19. T

    Hydraulic lift cylinder scored needs replacement/repair

    I just rebuilt all the cylinders on my b1630 loader. 90 bucks for 3 sets of seals from a local hydraulic shop. The two bucket cylinders were a little rough like that, i lightly sanded them and slapped it back together. They hold pressure just fine and dont leak. My rear tilt cylinder is about...
  20. T

    Hydraulic Identification Help?

    It looks like you have a ton of added pieces to make the fittings work. If you need new hoses anyways, i would take a hose off and take it with you to a hydraulic shop. Show them the fitting you need and have them crimp the connector needed to connect directly to the hardline. You could cut out...