Search results

  1. lakehouse_dreaming

    Cooler Mount

    Ended up finding some scrap electrical strut laying around the house and an old SS toolbox tray from my old truck. A couple 90 degree fittings and bolts and came up with this. It mounts using the ROPS bolts and can be removed with just 2 bolts. Just have to cut the one piece down to the correct...
  2. lakehouse_dreaming

    Cooler Mount

    It is a couple days at 3-4 hours a day.
  3. lakehouse_dreaming

    Cooler Mount

    I could sit one in the loader bucket but I know I would dump it out not thinking. I would think it would be hard to bushhog with the backhoe attached though..
  4. lakehouse_dreaming

    Cooler Mount

    Has anyone made or found a way to mount a small cooler to your tractor? I would like to have a small one to carry snacks, water, and maybe an adult beverage or two to be able to enjoy while bush hogging the horse pasture as it takes me a couple days to do it.
  5. lakehouse_dreaming

    What did you do to or on your Kubota today?

    Scooped a bucket of sand from down by the creek to fill some holes in the yard and then the wife wanted to learn how to use the grapple so I had her pull up a few dead shrubs from in front of the house that we need to replace. on a side note, I may never get to use the tractor/grapple again she...
  6. lakehouse_dreaming

    Looking at grapples

    I am guessing you have the Wicked 60? EA recommended the 55" to me for my L3901 when I purchased it because of the fact it is 160lbs~ less than the 60"
  7. lakehouse_dreaming

    Looking at grapples

    Another vote for EA Wicked 55" I have it on my L3901 and it is on the tractor more than the bucket.
  8. lakehouse_dreaming

    What did you do to or on your Kubota today?

    Look at the EA Wicked 55" I got mine about a month ago and have beat it up pretty good and it hasn't bent or broke. The lower tines are now laminated and I really don't see how you could bend them. Not saying it can't be done though. It weighs around 240lbs...
  9. lakehouse_dreaming

    What did you do to or on your Kubota today?

    Graded off an area where the in laws will be putting a pool. My buddy brought up his mini ex to do the digging and breaking up the ground. I used the L3901 with the loader and box blade to move and level the dirt. We had to cut it down around 20" on the high side and build up the low side...
  10. lakehouse_dreaming

    L2501 Hydraulic Overfill resolve. (2021 L2501 still under warranty)

    Appreciate the response. I know it has the dipstick, I was thinking that there may be a sight hole as well as the dipstick.
  11. lakehouse_dreaming

    L2501 Hydraulic Overfill resolve. (2021 L2501 still under warranty)

    I know that the L2501 and L3901 are basically the same tractor just with a different engine. I have never seen a sight window on my L3901 though. Where should I look for it?
  12. lakehouse_dreaming

    BORA wheel spacers

    I have looked at wheel spacers for my L3901 and I see that there are aluminum and steel versions. What are the Pros and Cons of each?
  13. lakehouse_dreaming

    What did you do to or on your Kubota today?

    Got the EA wicked 55 in on Friday so I got it hooked up and hauled back to the house. My old roommate and now neighbor is putting up a fence in his back yard so the dogs can enjoy it safely so I donated the chain link from my old dog pen (I put in an electric underground fence) and dropped it...
  14. lakehouse_dreaming

    50 hour service

    The old part number may not have come with it but the new part number HH3A0-82623 includes the magnetic ring.
  15. lakehouse_dreaming

    50 hour service

    The new filter I put on had the magnet on it. Didn't lose but about a quart of fluid. I just was shocked by the rubber piece. It seemed like a piece of caulk.
  16. lakehouse_dreaming

    50 hour service

    I just did the 50 hour service on my L3901 and when I replaced the HST filter with the magnetic ring on it I found a rubber piece sitting in the filter when I took it off. It is pictured below. Anyone know what it may be?
  17. lakehouse_dreaming

    List of grill guard fabricators and or skid plates..

    Another vote for the Lown Performance grill guard and chain bucket. Easy to install, great fit, and I love the chain bucket.
  18. lakehouse_dreaming

    What did you do to or on your Kubota today?

    We need pictures of this
  19. lakehouse_dreaming

    What did you do to or on your Kubota today?

    Did some bush hogging. Luckily we also had a JD with a 10' bush hog running as well. It would have taken forever to cut the pasture with my 5'. After we finished the field I took off through the trails and cut them as well as moved some dead trees that had fallen across them. The loader makes it...
  20. lakehouse_dreaming

    L4701 Regen twice in first 20 hrs?

    My L3901 didn't regen until around the 35 hour mark. I kept waiting for it to happen starting around 20hrs but it didn't. I run it around 2000 rpm anytime unless I am doing PTO work. I also try not to let it idle if possible and turn it off unless I am at our hunting property which is about 25...