Search results

  1. D

    Gear heads

    Put my winter tires on last Saturday, and they had to be programmed into the car. The machine that was used didn't recognize the sensors in the valves, but the car did. Marked the summer tires so they will go back on in the same place as they came off.
  2. D

    A little whine anyone?

    Until some cop is blinded by the lights sitting at an intersection.
  3. D

    B2782B snowblower - loosening driveline

    I think after 5 years you should treat it to all new bearings in the spring, and check everything. The chain drive snowblowers take a beating, but they are very durable. I am switching to the gear reduction box snowblower for this year's snowfall, but I think that I am going to keep my chain...
  4. D

    Front snow blower for B2601

    I believe that the BX & B both use the same K Connect, but the driveshaft is different.
  5. D

    Wanted: BX Snowblower Gear Box Case

    Still looking. The one that riccinukeu has is not the one that I need. The one that I need it at the front of the snowblower, and between the augers.
  6. D

    Post Hole Foundation Question

    Don't forget to bring some comfortable furniture, a small heater, and possibly an air mattress to sleep on.:)
  7. D

    What did you do to or on your Kubota today?

  8. D

    To Plow or not To Plow

    I suggested South, not West. South would be Alabama, North or South Carolina, or Georgia, you get my snow drift?
  9. D

    Another Am I getting Shafted Question

    What was the original cost of the tractor when you put down the deposit? Below is the cost today, but might not be accurate enough because I don't know how it was ordered. You can google Build a Kubota tractor and go to the Kubota website to see the current costs. I just can't understand an...
  10. D

    Self-Check-out at Walmart

    If that happened in New England or the Northeast, the person that shot out the tires would be charged with a gun violation. I heard on the news that NJ will not even respond to shoplifter complaints from the stores unless the amount is greater than a thousand dollars. When I called the police...
  11. D

    Front snow blower for B2601

    It is kind of late in the season to find used, but occasionally a complete unit shows up on Facebook Marketplace or Craigslist. I sold a BX5455HD over the weekend, and the buyer told me that he has been looking for one for 5 months, and those that he found were 100s of miles away. Sold my 60"...
  12. D

    BX2200 Hydraulic Hardline question

    Flat rubber roofing makes good line protectors when wrapped around the line and held in place with wire ties.
  13. D

    To Plow or not To Plow

    Move to a warmer climate and leave the snow and trails to the deer!
  14. D

    Post Hole Foundation Question

    The best way in my opinion is what I did with the 2nd stage of my deck build. Use the plastic footers and Sonotube, and pour a concrete pillar to a foot off the grade. Then use the heavy-weight galvanized metal brackets to connect to your pillars. That way they are off the ground and...
  15. D

    Kubota Restores Some Of Their Classics

    1938 Farm On! - 1938 Minneapolis Moline UDLX Comfortractor Minneapolis-Moline's 1938 UDLX Comfortractor combined a car and a tractor, just not with much success
  16. D

    Kubota Restores Some Of Their Classics

    I am certain that every part on the restored tractors was sandblasted clean, primed multiple times, and sanded to perfection prior to the color coat is applied. Most likely it is a base coat clear coat paint job. This is why it is so expensive to do a ground-up restoration on a car, truck, or...
  17. D

    Automating SSQA

    Just don't take too long. At my age, I have to make the best of every day on this earth. If I had known that I was going to live this long, I would have started taking better care of myself at an earlier age. LOL
  18. D

    B3030 how to disengage driveshaft to replace PTO shield

    If you have all new parts, just cut the old ones off with a hack saw. It is only plastic, and it should cut easily.
  19. D

    Post Hole Foundation Question

    When I built my deck, I just drilled the holes, put in the Sonotube, and poured the concrete. After a while, it started to settle and the deck was moving. I dug new holes and used a plastic footing that the Sonotube sat on, and filled with concrete. Put solid concrete blocks on top of the...
  20. D

    Need L245DT Label Part Number

    When did you look it up, I looked at every page for that tractor on the Messicks website, and I couldn't find but 2 or 3 decals available.