Search results

  1. D

    Cutting Deck Lock Out Trouble

    Thanks for tip. That front bracket has been a bugger to remove from the deck since I bought tractor, it was a pita to remove the first time I ever took deck off. It is off now, so I’ll take a look at it..
  2. D

    Cutting Deck Lock Out Trouble

    Ugggh. Trick in above post did not work. Another site, someone recommended adjusting the linkage set bolt( left side, behind wheel) - no dice with that. Took deck off and had a look see. The bottom of that spiral cam has a nub sticking out on 1 side, it looks like it’s supposed to go into that...
  3. D

    Bx2680 inner tie rod boot failure

    Yep, common failure item on the BX's. Get the aftermarket ones from BotaProducts and be done with it. I did them on my BX1870 within the first 2 years I think of owning it. They were still holding up well when I traded it in...
  4. D

    Cutting Deck Lock Out Trouble

    Mine just started doing this also :mad: :mad: :mad: :mad: . It worked before( when I bought tractor in winter and took deck off to plow driveway). I know it worked before I dropped off at dealer back in June. I went to lock it up the other day and it stops at the notch before "Top". I know the...
  5. D

    What did you do to or on your Kubota today?

    Finally got around to putting the R14T's on I got a few weeks ago. Quick drive around yard and to make sure they cleared deck with the 2" spacers. All good. I set the pressure to 24 psi for front and rear so it's easier for me to remember. Fronts have a max of 30 psi and rears have a 34 psi max.
  6. D

    What did you do to or on your Kubota today?

    Personally, I'd do sunflowers. There's a place near us that plants quite a few acres and has it set up as a business so people can wander in the fields,take pictures, has food vendors,etc. They let people cut the heads and charge $1 each flower. They have multiple different colored varieties(...
  7. D

    What size rotary cutter for a BX2380??

    Ok, a question. Is a shear bolt better or worse than a slip clutch gearbox? Slip clutch RCR1248"s were $250-$400+ more( at 2 other dealers) than the shear bolt ones at my dealer. Land Pride brochure lists the RCR 12 series as matched to the BX series....
  8. D

    What size rotary cutter for a BX2380??

    Well. I stopped by that other dealer and inquired about the RCR1242 they had listed at another store. I asked about the Kioti 1248 they had on lot, gave me spiel about how Woods makes them yada yada. $2495-no thanks . The Land Pride 42" ones were same price, plus freight to get them from their...
  9. D

    What size rotary cutter for a BX2380??

    My dealer has the Land Pride RCR1242 rotary cutter on order, and we know what that means nowadays, but the estimated price is about same as the King Kutter XB 48" that Runnings has(they still have some RCR1248's in stock) I'm gonna stop by a different dealer near me that lists they have 2-...
  10. D

    What did you do to or on your Kubota today?

    There were 4 on the floor, first one was already sold. They have at least 2 left. At least last 2 of serial # is same as my birth year….
  11. D

    What did you do to or on your Kubota today?

    Dealer trip again today, as when I picked up the R14T tires last week I saw some Land Pride quick hitches on display-the QH10 and QH15. Started doing some lookin' on the internets and decided I wanted one. Salesman told me the QH10 and QH15 weren't for the BX series(just as well, they started at...
  12. D

    What did you do to or on your Kubota today?

    Stopped by dealer today and picked up the full set of R14T tires that came in. Traded my R4 tires toward them, paid just over $213 for the set. Too hot to put them on, probably on my next day off...
  13. D

    What size rotary cutter for a BX2380??

    Never even dawned on me about the owners manual. I just checked it- for the BX2380/2680, it states single blade maximum cutting width of 48" and 400lbs. For rear mowers(finish), 2 or 3 blade, 60" and 577lbs maximum. Weird it's different weights, unless because the rotary is longer???
  14. D

    What size rotary cutter for a BX2380??

    Hi folks! Thinking of adding another implement to my collection. Is a 4’ rotary cutter too much for a BX2380? I’ve been looking for used ones, not many, all 5’ and above. If I go new, my dealer has some Land Pride RCR1248 in stock, and the Runnings has a couple of the King Kutter XB 4’ in stock...
  15. D

    Workshop manual(WSM) for Kubota BX1870/2370/2670

    Sealed one is sold, still have opened one with/without binder....
  16. D

    Thank you Ralph! I'll get the manual out Wednesday morning and give you tracking once I get it...

    Thank you Ralph! I'll get the manual out Wednesday morning and give you tracking once I get it. Take care and have a nice weekend-Bob
  17. D

    My Paypal is reprice1us@yahoo.com - My next day off is next Wednesday(7/20)so that’s earliest...

    My Paypal is reprice1us@yahoo.com - My next day off is next Wednesday(7/20)so that’s earliest I’ll be able to ship out, as I work 7am-7:15pm- Bob
  18. D

    Workshop manual(WSM) for Kubota BX1870/2370/2670

    I have 2 WSM for the 70 series BX series. One is still sealed in plastic with no binder, the other one has a binder. $30 shipped for the sealed one, $35 shipped for the one in binder.(or can ship without binder for $30)Shipping to lower 48 only...
  19. D

    Took used oil and coolant to Advanced Auto

    All gets shaken up and taken back in oil container. Advance takes it, they have a sheet you put your name and address on with how many gallons. Tractor Supply takes it also around here.
  20. D

    Cub cyclops mowers

    Better to post on OnlyCubCadets, and maybe post your location. I redid an 1864 last year, I was thinking you had the ones with the Kubota diesel engine...