Search results

My factory outer boots lasted about ten hours. Installed the boots in the link three years ago. Still there and no problem

If I tried that the cable would break when the tire was half way through. Pretty good idea though.

Good luck. Safety first.

Will do. Supposed to be built the week of July 25

Some are. My dealer let me take their Lightning demo to drive over the weekend. Awesome truck. Sticker on the demo, a standard range Lariat, is $69k. That is a lot $$$ for a truck with a 230 mile range. I ordered the Pro model which stickered at $45k

Same scope I bought and still going strong.

Times have changed. 47 years ago, I bought a deer rifle, which I still have. Took it to a department store to buy a scope and have it installed. Walked through the mall with my rifle in hand. Did not even get a second look. Could you imagine if you did that today?

Sounds like you could use a Ventrac or Steiner

I would not want to cut a neighbors grass for money. If you reduce the cost, you think you are doing her a favor, and she will think she is doing you a favor. However, every now and then the Calvary fired up their mowers to help a neighbor out when they could not cut their own grass

Below is a Neil video from 2018 comparing the 1880 to the 2380

Just something else to consider. If you are going to be using the shanks frequently, the Landpride that you are looking at have spring clips to hold in the shanks. We have the 48" Landpride that uses the spring clips. If I had to do it over again, I would have purchased a BB that used pins to...

Hopefully the OP found a good pair of gloves after three years. For future searchers, I like to use decoy gloves when it is wet and cold. https://www.amazon.com/TideWe-Silicone-Waterproof-Insulated-Waterfowl/dp/B082KFYZDR

Neil just made a good video:

Reference to this article: https://nypost.com/2022/04/13/blm-co-founder-financial-disclosures-triggering-and-unsafe/ Only in America. Yikes

I am having triggers reading this thread.

As stated previously, to make your life easier, get a Lock N Lube. Makes greasing simple

I do not think you are too far off on your price. As a point of reference, I just got a quote on a L3302 with a third function and two sets of rear remotes. $29,467. (no backhoe) Was watching an auction on line yesterday, located in Pa. They had three low hour L3301s that went in the low $20s...

I agree that both would be nice to have. Right now I do not have any. I can tell you that I adjust my top link a lot more frequently than the side link. If I had to choose one, I would get the top first. Regarding your difficulty adjusting the side turn buckle, you can upgrade to ones that...

As others have said you may not need an impact, but it sure makes life easy. I originally bought one to change the blades on my zero turn. Just used it for spacers on the rear wheels of the tractor, and the lug nuts spun off like butter with the impact. Neighbor could not get a broken tooth...

Take a look at Messicks website. They have a parts look up tab, and you will find a diagram for the fuel system