Search results

  1. D

    Mower blade - how to repair suggestions

    I've got a few mower blades that are nicked and beat up from hitting various objects over the years. I've already replaced them but kept the old ones as you never know when you need a nice hunk of steel. I was thinking about ways I can repair them for more use. It seems the most common way...
  2. D

    newbe initial review of yeswelder mig-205ds using 110v flux core (picture rich)

    As requested - this is my initial review of the yeswelder mig-205ds (green) using 110v power using flux core wire (yeswelder E71TGS.030-inch flux core wire). Background - very new self teaching welder, the only other welder I've used is a harbor freight 90a flux core (probably dozen years old)...
  3. D

    little body work on the deck.

    We've been getting our daily (sometimes twice) summer storms here in Georgia. Happy to be getting the rain, but it also means a huge growth spurt for the the grass and weeds. I knew I had to drop the deck to clean off all the wet grass, but found an unexpected surprise. I can't say I'm sure...
  4. D

    Terrible looking but functional tiedown bracket

    I'm a new welder, teaching myself fcaw. Here is my second weld project, 1/2" D style tie down point for when hauling my BX2380. Had a tree (sweetgum) on far side of small creek fallover in recent heavy rain. Used the homemade mount point with chain to drag the trunk up the creekbank. I had to...
  5. D

    In market for budget welder

    I thought this would be best place for this question. I currently have an old (10+ years) harbor freight 90amp flux core welder (running hobart wire). I'm teaching myself and was told a stick welder would be easier to learn than flux core. There are so many welders on the market, looking for...
  6. D

    Rhinohide canopy?

    I've recently taken on mowing a large lot where I'm out in the sun for hours with no shade so I'm looking at options for a canopy for my BX2380. Specifically, I'm looking at the rhinohide for durability as I'll also be mowing around/under trees at other location and most likely be lazy not want...
  7. D

    Searching for nc/unc cat 1 long lift arm pin

    I have a trailer hitch attachment that isn't wide enough for my quick hitch. The pins screw into it and are a nc/unc thread. I can't seem to find any, all that i find are nf. I picked up a pair from Tractor Supply, but they wouldn't screw in. They are NF thread. I have a titan attachments...
  8. D

    Loader arms not in sync, difficult to re-attach loader

    BX2380 with LA344 loader. Recently - last 2 times I've taken loader off, it's been very difficult to re-attach. When sitting on tractor, the right loader arm is "slower" than the left arm when operating the hydraulics to prepare for re-attaching the loader. When re-attaching the loader, the...
  9. D

    New BX2380 ROPS pin holes not lining up

    Hello all, I'm a new Kubota BX2380 owner (only have tractor with 60" mower deck, waiting on back ordered loader). For the time being, I am parking it in my garage and need to lower the ROPS to clear. Ever since I took delivery I had to beat one pin out/in with mallet. After 2.6hr of use, it...