Search results

  1. J

    Fitting a Kubota BT602 Backhoe to a BX2200

    No, I bought the sub-frame several years before finding the BT602. I was hoping to find a small Woods backhoe, but could never locate one. The BT602 showed up at a good price, so I bought it with the idea I would make it work somehow.
  2. J

    Fitting a Kubota BT602 Backhoe to a BX2200

    I also got the hoses from the backhoe sorted out. The folks at Messicks were great and got me straightened out. A big thanks to them.
  3. J

    Fitting a Kubota BT602 Backhoe to a BX2200

    I went back and looked at some of the paperwork that came with the sub-frame. As mentioned, I used a Woods 4-point sub-frame mounting kit for a BH6000 backhoe. The kit will fit Kubota's BX1800, BX1830, BX2200, and BX2230 tractors. The Model number of the sub-frame kit is 1008537. Hope that helps.
  4. J

    Fitting a Kubota BT602 Backhoe to a BX2200

    I bought a subframe for a woods backhoe that fit the bx2200. Had to mod the portion of the mount that bolts to the backhoe to work with the BT602
  5. J

    Fitting a Kubota BT602 Backhoe to a BX2200

    I have everything ready to go except identifying the hoses from the BT602. There are 3 hoses. I know one is in, one is return to power beyond (PB) and the last is return to tank. I have a setup where there is out from the tractor, return for power beyond and I'm dumping the return to tank...
  6. J

    Problem Attaching Electric Clutch to front PTO

    I'm trying to figure how to attach my electric clutch driveshaft to the front pto of my B7100HST-D. As you can see in the attached pictures the front pto spline is larger than the driveshaft. Is there an adapter that goes in between? I know the electric clutch was used on a B7100, so it should fit.
  7. J

    Problem with Electric PTO Clutch

    Aquaforce, you da man. Bought a mid 60's vintage ford ac compressor clutch and it is exactly the same. Thank you so much!! Wondering if someone can help me out with another question. Looking at the front pto splined shaft (male), I measured the diameter as 1.16" or 29.5mm, and I counted the...
  8. J

    Problem with Electric PTO Clutch

    Aquaforce, thanks for the information. I'll check into it.
  9. J

    Problem with Electric PTO Clutch

    Actually it's not quite a problem, it's more like a disaster. I recently bought a model b-48a deck for my B7100hst. It has the front mounting electric clutch setup to drive the deck via a belt. The person I bought it from told me that the electric clutch wasn't working. I took the chance that it...
  10. J

    B7100HST Old Tractor, New Owner

    There are six.
  11. J

    B7100HST Old Tractor, New Owner

    I have another question. Is the air filter strickly a dealer item or can you find elsewhere?
  12. J

    B7100HST Old Tractor, New Owner

    My tractor is 4wd. According to the link you sent me for my serial number in 4wd hydro the production date is sometime after 1986. Thanks for the heads up on the hyro oil.
  13. J

    B7100HST Old Tractor, New Owner

    Traildust, thanks for the welcome and the information. What I don't understand about the year of manufacture is why the production years are different for the 4wd? Since my tractor is 4wd does that change when it was made? If not, why? I'm confused.
  14. J

    B7100HST Old Tractor, New Owner

    Hi everyone, my name is Jim. I live in the southwest corner of PA, and I'm the brand new owner of a Kubota B7100HST. I must admit, I know very little about diesel engines, so I'm off on a new adventure. But that's okay, at least for the moment I'm looking forward to it. Now for the first of many...