Search results

all gone. randy

yes on the hitch and cover, i will PM you to work out the details. thank you

yes, we are interested. wondering if you can get a pic of the hitch and rear cover, just to make sure we are both on same page, also wondering if you have a good head light lens that you are willing to separate from the hood assy? if so, pic of that also. thank you

i w i will get w/my son and find out if he wants to go this way instead, thank you

how much for the 3 pc of the drawbar hitch that bolts to the 2 sides of the frame?

took off GCK500-DS bagger and RCK48R-21G deck. deck has 2 spindles out, and bad gearbox. bagger has some hole is in material, have basket assy and frame. deck shell $125, drive shaft $175, bagger & frame $125. see anything else you what priced to buy separately, let me know, have pulleys...

got the new used deck, removed the RCK48R-DS deck and grass catcher, found a 60". got it all together today. runs great.

set of needle thrust washer bearing under the spindles at the axle, new wheel bearings, steers like a dream. just enough room for the snap ring on the right hand side and get the new steer arm on top on the left.

back in the early 80's, we had a our Case Lawn & Garden rep point out to use the torrington needle thrust brg on the (at the time) Case 200 and 400 series. it was the cheap mans power steering if you had snowblower on them. we did that to my father in laws 3016 when he bought new in 92...

yes it was. i dont believe the front spindles where ever greased since new. we had to pound out the right hand one w/a sledge hammer. got them out, got rid of the dried up dirty grease, cleaned the zerks and put back together. steers like a dream. now looking for some needle thrust bearing...

I recently purchased a used G2160-R48S that I knew had a steering issue. it will turn 15 degrees left or right just fine. after that it turns really hard. i know i will have to diagnose further, but to start, am i looking at a power steering unit under the steering wheel or the rack and pinion...

i recently purchased a used G2160-R48S that i knew had a steering issue. it will turn 15 degrees left or right just fine. after that it turns really hard. i know i will have to diagnose further, but to start, am i looking at a power steering unit under the steering wheel or the rack and...

Re: For Sale: Rolling A Frame Hoist sold the A Frame, thanks for looking

have you checked w/your local dealer? i believe the kit you want is L3961, 3point linkage kit. i believe it sells for about $525 plus freight coming in for about $50. if you cant get, PM me i we can discuss.

REDUCED Rolling A Frame gantry hoist w/trolley and chain hoist. Trolley is rated at 1/2 ton. Continuous chain, chain hoist is rated at 1 ton. It is 8' between the legs. The width is 5' between the wheels. 4" steel wheels. Bottom of trolley eye to ground is 98 1/2". Trolley will travel 66" side...

depending on your tractor/loader, Kubota / Landpride make 3rd function kits that are relatively reasonable, and very clean and compressed. an electric hydr valve is bolted on (near or on) the loader cross bar. the hoses from the valve to the bucket are plumbed into the valve, a set of hoses...

that is the kit part number from whole goods, not thru parts. i am not sure on the BX__80 models, i thought they had armrest on the seat. do you have the bolt holes in the back of your seat?

I work for a Kubota & CIH dealer

you may be cannot see it clearly, but I have the rod and tube cut off at an angle so when level it is all flush, if I want to go lower, it will show a shadow.

I did not like the gauge on the bucket, wanted a true bucket level indicator rod that was not in the way, since there is not one available for this model, I looked at the newer ones and started planning. Used misc. metal from my shop, cut, welded, drilled and came up w/this. I have the quick...