DD, that piece with the split looks like that orangeburg "stuff" of the '60's, not cast iron!
What did you do to or on your Kubota today?
- Thread starter gurn
- Start date
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
D2Cat,
This client actually had two issues. Split in cast iron and split in copper pipe.
I didn't get a pic of the split in the 4" cast iron pipe. The one shown above was a split in the 3" copper pipe which was the drain line inside the house. And yes, I believe the house was built in the late 60's.
I finally dug out that large Tree of Heaven stump with the backhoe. It only took me 11 months and 19 days, that is how long it took dealers and Kubota to get an in stock unit in working condition so I could use it.
To get an idea of how big this stump was, the trunk is 11" in diameter and the loader couldn't begin to lift it. That wood stays saturated with sap and water and is extremely heavy. I want to level the area and plant grass so it can be mowed, any roots will just spring up more growth. These trees feed and attract spotted lantern flies, so I am killing every one I find.
This stump was in the edge of the woods and I never thought that a sewer line would be next to large trees, but I broke into it, that repair will need to wait till next week. I guess the woods slowly expanded over the 49 years that the drain field was installed.
To get an idea of how big this stump was, the trunk is 11" in diameter and the loader couldn't begin to lift it. That wood stays saturated with sap and water and is extremely heavy. I want to level the area and plant grass so it can be mowed, any roots will just spring up more growth. These trees feed and attract spotted lantern flies, so I am killing every one I find.
This stump was in the edge of the woods and I never thought that a sewer line would be next to large trees, but I broke into it, that repair will need to wait till next week. I guess the woods slowly expanded over the 49 years that the drain field was installed.
ken erickson
Well-known member
Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
BetterThanAShovel
Active member
Equipment
B2650, BH77, SG0660 grapple, pallet forks, Bobcat 60" box blade
I installed a port into the side of the panel so I could much more easily plug in the battery tender. I was really tired of reaching down near the exhaust in the front to plug it in at the end of the day. SOO much handier now. The charger plug is tied to the rafters with a simple retractable dog leash so that when I unplug it from the tractor, it retracts out of the way, and when I need it, it's in easy reach to pull down and plug in.
S-G-R
Well-known member
Lifetime Member
Equipment
LX3310, LA535, rear remotes, third function, R14's
Added Ken's Bolt On Hooks/clevis, receiver tube and a 511 brush guard to the LX3310.
S-G-R
Well-known member
Lifetime Member
Equipment
LX3310, LA535, rear remotes, third function, R14's
That's a beefy grapple. Should be a fun cleanup with that machine.
BetterThanAShovel
Active member
Equipment
B2650, BH77, SG0660 grapple, pallet forks, Bobcat 60" box blade
There were several to choose from I think, but this one appealed for some reason. No complaints with it.
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Not much, but starting to think about service of the mower deck.
Always sharpen blades each spring.
Dang, swear I hit a bunch of hard stuff last year, but blades all look like this. Been using Gator blades for quite a while. Pretty stout.
Always sharpen blades each spring.
Dang, swear I hit a bunch of hard stuff last year, but blades all look like this. Been using Gator blades for quite a while. Pretty stout.
I got the call that I didn't expect for a few months yet - my local dealer called to let me know the L805 loader and bucket I ordered for my L4060 should arrive next week. So I ordered a couple chain and binder kits so I can take it to dealer to get the loader attached. So excited!
Bmyers
Well-known member
Lifetime Member
Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
I went to the farm today and helped dad pull the batteries from his tractor so he could take them into town and get new ones. While he was gone doing that I did some mowing and tried out my new ISOtunes Free Aware that the ife got me. They work really well and provide great hearing protection. If you need a gift idea for a loved one and they work around a noisy environment, these are well worth the money. They allow you to communicate normally and then cut off once the noise level gets too high (above 85db) and they will bluetooth to your phone and let you play music/podcast while you work.
Got the mowing around the field edges done and found a couple trees we need to clean up before planting. Dad got back with the batteries, but one of the brackets broke, so we couldn't finish the install, but at least we got the new batteries there.
When I got home, I did the yard work, weed eating and mowing. I went to blow off the driveway and sidewalk with my DeWalt blower and it seemed to work fine, but then would cut out. I tried it a couple of times and it kept doing the same thing. I checked the battery figuring it might be almost dead, but nope three bars. Reseated the battery just to make sure I had a good connection and it was still doing the same thing. Pull the trigger, it winds up and starts and then cuts out.
Being the great electrician I am, I knew it had to be the switch since I eliminated the battery. So, I'm turning the blower in all directions trying to look and see if I can see a problem with the switch. Everytime, pull the trigger and about three seconds later it cuts out. As I'm looking at the blower I notice dust/debris flying everywhere.
Me with my high level of intelligence was wondering what was causing all the dust and debris? Just as King Belshazzar saw the writing on the wall, the light came on for me and I realized the blower was working just fine and that my ISOtunes Free Aware works really good also.
Of course being the typical male, I had to quickly look around and see if anyone saw me being a moron, at which time I gave our neighbors a polite wave so they knew not to call the police thinking I had lost my mind.
Well, I confirmed for the neighbors what most already knew, that my wife had married a moron.
Got the mowing around the field edges done and found a couple trees we need to clean up before planting. Dad got back with the batteries, but one of the brackets broke, so we couldn't finish the install, but at least we got the new batteries there.
When I got home, I did the yard work, weed eating and mowing. I went to blow off the driveway and sidewalk with my DeWalt blower and it seemed to work fine, but then would cut out. I tried it a couple of times and it kept doing the same thing. I checked the battery figuring it might be almost dead, but nope three bars. Reseated the battery just to make sure I had a good connection and it was still doing the same thing. Pull the trigger, it winds up and starts and then cuts out.
Being the great electrician I am, I knew it had to be the switch since I eliminated the battery. So, I'm turning the blower in all directions trying to look and see if I can see a problem with the switch. Everytime, pull the trigger and about three seconds later it cuts out. As I'm looking at the blower I notice dust/debris flying everywhere.
Me with my high level of intelligence was wondering what was causing all the dust and debris? Just as King Belshazzar saw the writing on the wall, the light came on for me and I realized the blower was working just fine and that my ISOtunes Free Aware works really good also.
Of course being the typical male, I had to quickly look around and see if anyone saw me being a moron, at which time I gave our neighbors a polite wave so they knew not to call the police thinking I had lost my mind.
Well, I confirmed for the neighbors what most already knew, that my wife had married a moron.
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Most expensive wheelbarrow I’ve ever owned, and I’m not complaining one bit. 
S-G-R
Well-known member
Lifetime Member
Equipment
LX3310, LA535, rear remotes, third function, R14's
Added a fuel filter and HST filter guards from Specialty Repairs Custom Mods to the LX3310.
Attachments
Removed some tree pieces from 10-12 years ago to the right side of the driveway where it drops off quite sharply from the driveway.
Finished up by bush hogging there and climbing that steep slope up to the driveway. The B2601 is like a billy goat in L.
Finished up by bush hogging there and climbing that steep slope up to the driveway. The B2601 is like a billy goat in L.
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
New lawn installation today. all 20'x20'! I looked ridiculous with the tractor and box blade on a townhouse lined street.
Anyway, this was for a dig job we did back in dec/jan. I managed to snag a 4" cleanout plug with the box blade. Sheared the "nut" right off the top of the pvc fitting. Of course, I didn't have any replacements on the truck so I called one of our install plumbers who wasn't far away.
Lawn regrading came out nicely, seed and straw. Quick $xxx. I just can't believe that the homeowners couldn't find the energy to do it themselves. It's rather astonishing.
Anyway, this was for a dig job we did back in dec/jan. I managed to snag a 4" cleanout plug with the box blade. Sheared the "nut" right off the top of the pvc fitting. Of course, I didn't have any replacements on the truck so I called one of our install plumbers who wasn't far away.
Lawn regrading came out nicely, seed and straw. Quick $xxx. I just can't believe that the homeowners couldn't find the energy to do it themselves. It's rather astonishing.
Last edited:
I'm shocked they wanted to pay for that kind of work on a property the size of a large bedroom.
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Me too. It's really quite sad.
I'm revising my guess as to the size to: 16' x 20' . Here's a shot of the before...I didn't bother taking an "after".