Does Kubota offer a loader attachment that'll lift a MMM deck?

D

dieselbob69

Active member

Equipment
Kubota BX2380 (previously a BX1870 and GR2100)...
Jan 2, 2022
159
61
28
WNY
Hi! I was wondering if Kubota or any aftermarket company offers an attachment for your loader that'll hold your mower deck vertical for maintenance? Driving by the Deere dealer other day and they have one on display out front-it's a quick attach to their drive over deck that you can mount to loader and lift deck and keep it vertical for easy maintenance on blades and the underside, and it's securely attached, not swinging around,moving,etc...
 
Last edited:
OrangeKrush

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
514
113
Indy
Welcome to the forum diesel! You can get creative with your FEL, when I had my 7510 I just hooked straps to the front on either side. I think at the rollers.. and just eased it up until the rear was just sitting on the ground still.

If they do make one I'm sure it will be $$$. If you're handy you could make a cradle out of 2x4s that would hold it vertical and store it out of the way easier. Just throw some small rollers on it.
 
  • Like
Reactions: 1 user
D

dieselbob69

Active member

Equipment
Kubota BX2380 (previously a BX1870 and GR2100)...
Jan 2, 2022
159
61
28
WNY
OrangeKrush said:
Welcome to the forum diesel! You can get creative with your FEL, when I had my 7510 I just hooked straps to the front on either side. I think at the rollers.. and just eased it up until the rear was just sitting on the ground still.

If they do make one I'm sure it will be $$$. If you're handy you could make a cradle out of 2x4s that would hold it vertical and store it out of the way easier. Just throw some small rollers on it.
Click to expand...
I made 1" axle and some of those air filled wagon wheels from Harbor Freight for the 54" deck from the 1870. I've used straps/chains to move deck before, just like something that deck would attach to and hold in place vertical so that it doesn't move when scraping/cleaning deck. The JD deck has some mounting points attached to deck, that fits into their style quick attach loader.
 
OrangeKrush

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
514
113
Indy
I see what you're saying.. I'm not aware of any for the BX but that doesn't mean there not out there. I'm thinking about purchasing a 60" for my BX so I may have to put something together soon. Good luck!
 
D

dieselbob69

Active member

Equipment
Kubota BX2380 (previously a BX1870 and GR2100)...
Jan 2, 2022
159
61
28
WNY
OrangeKrush said:
I see what you're saying.. I'm not aware of any for the BX but that doesn't mean there not out there. I'm thinking about purchasing a 60" for my BX so I may have to put something together soon. Good luck!
Click to expand...
I have a 60" BX deck I bought used last September for an experiment with my BX1870, but since that is gone and I got new 60" deck with my BX2380 I'm selling the used one since I don't need 2...
 
S-G-R

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310, LA535, rear remotes, third function, R14's
Jun 17, 2020
899
1,600
93
PEI Canada
Two small clevis hooked into the mower brackets and a pair of straps was my go to.

Screenshot_20220216-181640_Chrome.jpg
 
G

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,858
4,035
113
Greensville,Ontario,Canada
I just lift the whole front end of the tractor up using a chain hoist and overhead Ibeam. Dang sight easier than removing and reinstalling the deck every week.
 
  • Like
Reactions: 1 user
OrangeKrush

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
514
113
Indy
dieselbob69 said:
I have a 60" BX deck I bought used last September for an experiment with my BX1870, but since that is gone and I got new 60" deck with my BX2380 I'm selling the used one since I don't need 2...
Click to expand...
Where are you located? Might be interested if close by..
 
D

dieselbob69

Active member

Equipment
Kubota BX2380 (previously a BX1870 and GR2100)...
Jan 2, 2022
159
61
28
WNY
GreensvilleJay said:
I just lift the whole front end of the tractor up using a chain hoist and overhead Ibeam. Dang sight easier than removing and reinstalling the deck every week.
Click to expand...
That'd be swell if I had a post barn and I Beam... as far as straps/chains, deck still moves around. How I've cleaned deck for BX1870 last 5 years was removing it, then propping it up with wood stick against gearbox or top of deck and the transition crack between garage floor/driveway and tilted back so top of rear deck wheel posts are setting on ground
 
D

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,873
3,167
113
Wind Gap, PA
I'm not sure if this is helpful to you but I stored/worked on my mower deck like this. Simple chain latched over a hook in a wall stud. I never had a single problem with it stored this way. This was a 60" deck for a BX. It really wasn't that difficult to push it up against the wall, then lift/rotate it into position. Of course, I had the chain already hanging from the hook before I did the heave-ho.

mower deck storage.JPG


YMMV
 
  • Like
Reactions: 1 user
jyoutz

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
2,486
1,581
113
Edgewood, New Mexico
Attach chain hooks to bucket.
 
  • Like
Reactions: 1 user
D

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,873
3,167
113
Wind Gap, PA
ok. ok.

alternate method...I just figured that was too lazy easy. :)

deck lift.JPG
 
D

dieselbob69

Active member

Equipment
Kubota BX2380 (previously a BX1870 and GR2100)...
Jan 2, 2022
159
61
28
WNY
dirtydeed said:
I'm not sure if this is helpful to you but I stored/worked on my mower deck like this. Simple chain latched over a hook in a wall stud. I never had a single problem with it stored this way. This was a 60" deck for a BX. It really wasn't that difficult to push it up against the wall, then lift/rotate it into position. Of course, I had the chain already hanging from the hook before I did the heave-ho.

View attachment 78569

YMMV
Click to expand...
No free wall space...
 
D

dieselbob69

Active member

Equipment
Kubota BX2380 (previously a BX1870 and GR2100)...
Jan 2, 2022
159
61
28
WNY
dirtydeed said:
ok. ok.

alternate method...I just figured that was too lazy easy. :)

View attachment 78570
Click to expand...
yeah, I could do that, but I don't want the deck swinging around and scratching my shiny new tractor.... missed my point that the deck is securely latched onto the Deere loader. I'll have to see if it's still out front of dealer and take a pic of it....
 
D

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,873
3,167
113
Wind Gap, PA
dieselbob69 said:
yeah, I could do that, but I don't want the deck swinging around and scratching my shiny new tractor.... missed my point that the deck is securely latched onto the Deere loader. I'll have to see if it's still out front of dealer and take a pic of it....
Click to expand...
Nope. Didn't miss your point at all. I've seen it advertised.

Honestly, I wouldn't recommend hanging the deck from a bucket (or any loader for that matter) without a boom lock in place, or a bucket support at the very least.
 
  • Like
Reactions: 1 user
Matt Ellerbee

Matt Ellerbee

Well-known member
Lifetime Member

Equipment
MX6000
Jun 27, 2019
1,666
1,874
113
Canton, Georgia
dieselbob69 said:
yeah, I could do that, but I don't want the deck swinging around and scratching my shiny new tractor.... missed my point that the deck is securely latched onto the Deere loader. I'll have to see if it's still out front of dealer and take a pic of it....
Click to expand...
Google is your friend.
A23BA187-5D93-44FF-9E0F-3F97BEF5CE75.jpeg
 
OrangeKrush

OrangeKrush

Well-known member

Equipment
BX2680, LA344 with Piranha tooth bar, LP PF 1242, LP Rear Blade, KK 60" BB
Nov 15, 2020
1,047
514
113
Indy
I know this isn't something you were looking for but since we're here others might like the idea.. I know I do!
Not a BX but still a good idea.

Mower deck dolly
dieselbob69 said:
Between Buffalo and Rochester, would be willing to drive 100-200 miles.... wherabouts you at?
Click to expand...
Sorry I just saw this.. Indy.. too far! Thank you!
 
You must log in or register to reply here.

Top Bottom