Recent content by Willbeone

I just got my Lown Performance grill guard with chin guard/chain bucket installed.

Really...THANKS for the heads up!

If you try hard enough, you can bend the bucket on your Kubota.

My two cents... I used to mow just over 5 acres with my L2800 with a Woods 72" finishing mower and my wife would mow around the house, fence line and cedars on 48" Scag, which took us 3.5 hours to complete. Upgraded the Scag 48" to a 65" Scag Cheetah. I mow the entire property with just the Scag...

Yes, there is a place for the rocker switch on the Kubota handle, but the rocker switch provided in the wrlong kit does not fit. Besides not fitting the slot, the terminals of throttle up button and 3rd function rocker hit. Guess ill be calling wrlong Monday morning to see if they can offer any...

I got these today and installed the largest one at the back of the seat behind the gas shock. I ran the filling bulb out the back to allow for adjusting if needed. First time since purchasing the tractor the seat didn't bottom out and maintained desirable ride height. Longevity of bag yet to be...

Thanks for the Intel! I am still waiting on replacement fitting delivery, but was going to work on the wiring today. You don't if the dealer used WRlong's rocker switch in your original joystick handle or installed the one provided in the kit? I'd like to use my original handle due to having a...

My Wrlong kit did come with a mounting bracket to the torque tube with longer bolts included. My 3rd function valve actually mounts to the loader bulk head. The bracket provided with the kit would not fit over the bulk head tubes, which required a little grinding of the bracket slots to fit. I...

Yes, Kubota does make a specific 3rd function valve kit made by Landpride, if you're willing to wait till October or November for delivery. When I bought my L3560HSTC-LE the Kubota dealer suggested looking elsewhere for 3rd function valve. Superior or not, I bought the tractor to use.

I ended up ordering the WRLong valve kit through Messick's. While installing the hoses to the valve, found out after pulling the bypass tube, they supplied the wrong fittings. I'm currently waiting on replacement fittings to complete installation. Sad thing is when I contacted WRlong they were...

I'm going to try these and will let you know if they work or not....

Thanks for tip on Tiger Lights! Just purchased a L3560HSTC Limited and am in the process of outfitting. $95 isn't that pricey when you consider an OEM light is $94 plus the cost of a bulb at $34! Are the front and rear work lights the same? It looks like all I would need is the 4 lights and 2...

Thanks for the info! Messick's is trying to source an alternative. Luv his videos.

Thanks for the info! I talked with Messick's and their trying to come up with an alternative. I know their pretty high on W.R..

Upgraded my L2800 and took delivery of a L3560HSTC LE with a LA555 loader Friday. Dealer informed me the LP 3rd function valve kit (L2247) would not be available for delivery until October!! I've called a couple other places and their saying the same on delivery date. Anyone have any suggestions...