Recent content by tomwagner44

Got it. There is an adjuster bolt on the top of the housing. Found someone on another thread with the same issue and that was their solution so I tried it and Bingo! Still wants to fade when the idle is low and I move the lever to the lift position so that's another issue for another day (weak...

Ok, just figured out that the control lever is working properly from a directional standpoint. Back is up and forward is down. But, the lowering (down) function doesn't work. The 3pt blade will lower when the tractor is idling or not running and I pull the lever back (up position). The only...

Thanks Dan. It was working when I took it apart (except for the blade drop/fade in neutral). I was hoping for some sort of schematic to make sure I put it back together properly. Interestingly, nothing happens when I shift the valve into the raise position. It raises when I place it in the...

I got an older B7100D tractor not too long ago. When I lifted the 3 point then put the control valve in the neutral position, it would fade down to the ground. Tore it all apart and discovered the o-ring on the piston was the wrong size (too small) so I replaced it with a bigger one and put it...