Recent content by THE MACHINIST

I have an M7030n DT with the V4000-5a I am looking for a complete rebuild kit with liners pistons valves gaskets bearings. I found a complete kit on a website called Friday parts for 1346$. No idea of it’s quality and I do not see a source of origin. I see a kit listed on alibaba looks like...

Thanks guys I found the reservoir and it was low. miracle of miracles. Got both working again! you guys are the best.

I didn’t see a separate reservoir anywhere for a separate power steering pump is that a second pump on the front of the other one? the only lever for the 3 point I am aware of is the one that is supposed to control the speed thanks again

Thanks Dave the loader came off of a 70 HP Massey Ferguson. I don’t know about the pressure difference. It was from a similar vintage tractor is all I know. I have had it on my tractor for about 5 years without issue till now.

Thanks again for your time sir!

I’m guessing the hydraulic filter is the one on the right hand side of the machine down lower with the pipes coming from it?

Thanks again dave it is dark now I will get some pictures tomorrow the loader is one I adapted years ago from a Massey Ferguson

Dave thanks a lot for getting back to me and your time I included a couple pictures of the loader control and the lines that run to it. is that what you expected or no it looks like there’s four lines not six or seven

I have a late 80s early 90s m7030n 4wd. I recently lost power steering and the ability to raise the 3 point someone told me a hydraulic filter or port could be blocked. Not sure where that filter is or port. I do still have hydraulic power to the accessory ports on the rear which I have my...

To the top

I am still looking. I talked to a dealer and he said the la1153 could fit but due to it's quick detach design they don't attach in As many places so for rough use might not be as durable. So I will cross them off my list and look for a 640 720 1250 1880 or 1870 Thanks for the info Jamie

From what I have found an LA1153 M1250 M720 or m640 will fit anyone know where I might find one for a decent price? Best I have found is $1900 for a fire damaged one without the control valve In Wisconsin and I am in north idaho so looking at half that again in shipping. Thanks Jamie

I am looking at a 7030 narrow 4wd which doesn't have a loader. I need a loader for my use so trying to figure out which models will fit. I have seen M1250 and 640 on 7030's before but don't know if there are other models which will fit the 7030 or conversely because this one is narrow neither...