tcmeyers's latest activity
-
tcmeyers replied to the thread Ideas to un-stick pivot pin?.Heat the bushing and chill the pin. I’ll try. Maybe a heat gun and ice cube, before I torch the paint. Sawing would remove some of the... -
You could try some heat, but I'd likely just cut the pin with a Sawzall.
-
On my BH70 backhoe unit (on Kubota B2601HSD) the large pivot pin (25 mm diameter) on the square tube that that sets the thumb position...
-
-
tcmeyers replied to the thread Pin geometry for BH70 bucket? Looking at Titan 8 inch wide.Good idea. I think I better mount the BH and remove the existing bucket though, the proposed narrow one is so close to looking like it...
-
tcmeyers reacted to GreensvilleJay's post in the thread Pin geometry for BH70 bucket? Looking at Titan 8 inch wide with
Like.
well, you've got the required 'dimensions' so draw it out on paper or better 1/4" plywood and make a 'pretend' bucket. BTDt several... -
tcmeyers posted the thread Pin geometry for BH70 bucket? Looking at Titan 8 inch wide in Implements & Attachments.Unless I remove the stock bucket on my BH70, I don’t seem to be able to get a good measurement for what the holes and tab spacing should...
-
