Recent content by sshev

  1. S

    Weather break or heat houser L2900 others

    I bought this vinyl heater cab kit on eBay and then found a hard cab, so this was never installed. Paid $350 for it. I'd take half price or best offer. This is the eBay ad copy: Fits Kubota Tractor(s) L2900, L3010, L3300, L3410, L3600, L3710, L4200, L4310, L4610 Works With Kubota Loaders...
  2. S

    L2900 Glideshift locks up

    I've got a '95 L2900 with glide shift and shuttle shift (reverser) Several times over the past 6 months when changing directions using the reverser, the tractor will act like it's stuck between gears and kill instantly when the clutch is released. If I push in the clutch it will restart, but...
  3. S

    WTB: Cab for L2900

    Looking for a cab for a L2900 in Iowa or close.
  4. S

    bolt size & pitch L2900 Loader mounts

    I'm in the process of mounting a Westendorf TA111 on my L2900. Does anyone know what size and thread pitch the threaded holes on the sides of the tractor just ahead of the platform are? They were originally plugged with plastic caps and appear to be 14mm but standard 2.0 pitch isn't right.
  5. S

    L2900 Electrical

    all fuses check ok. I took the dash panel off and was checking for loose connections, the dash lights and glow plug indicator started to work again. Put the dash back on, and its not working again....so this is either a short, a loose connection, a bad wire, or a faulty relay. Nothing is...
  6. S

    L2900 Electrical

    I've got a L2900 gst. Yesterday while using it, the engine died suddenly. It started right up again, but now the top row of lights on the dash don't light, including the glow plug light and it won't shut off with the key...I now have to pull out the stop switch. It starts fine and the head...
  7. S

    LA452s on L2900

    I've been looking for a FEL for my L2900. A guy answered my craigslist ad that has a Kubota LA452S loader in good shape not too far from where I live. Kubota lists the LA480 as the loader for my tractor, how do I find out how easily the LA452s could be adapted or if it could?
  8. S

    WTB: Loader for L2900 - LA480

    looking for a loader for an L2900. The kubota model that fits is the LA480. Other manufacturers models would be: Westendorf TA-111, or Dual 105, or Koyker 155 or 220. I'm located in Iowa. Let me know if you've got something that would work.
  9. S

    Higher GPM hydraulic pump L3600

    I've got an L3600 with a loader. The stock hydraulic pump doesn't move the loader as quickly as I'd like. Is there a higher GPM pump to replace the stock one, or am I better off driving a bigger pump off the crankshaft and using a 2nd reservoir? The tractor does not have live PTO so a rear...
  10. S

    L3600 Block Heater port location

    I just bought a '97 L3600 with a Westendorf loader that I plan to use for snow removal. I'm in NW Iowa and temps get down to -20 and sometimes even colder, so I'm worried about getting it started in very cold temps. I don't have a heated place to store it. It currently has no block or hose...
  11. S

    Kubota L185 Parts tractor on eBay

    I've got lots of parts for a L185 for sale on eBay. Search for item # 270740271616
  12. S

    L185 for Parts

    I just bought a L185 parts tractor. I'm keeping the rear tires and rims, fenders, seat, and 3 point arms. The tractor was supposed to be a good runner with 1000 hrs. when the owner forgot to put the oil plug in and ruined the engine. there are lots of good parts here including but not limited...
  13. S

    L225 Front Rims

    I recently bought a Kubota L225 2 wheel drive. Its got really small tires on the front and they are about worn out. Since I've got to replace the tires anyway, I'd like to go to a larger size. My questions: what were the tire/rim options for the L225, do any non-kubota rims fit, and does...
  14. S

    B8200 hydraulics

    sometimes it helps to just go away and come back with a better outlook on life...I did that and was able to force the next size smaller socket on the badly disfigured head tight enough to hold. It held well enough that it came out with the help of an impact wrench. once out I used an angle...
  15. S

    B8200 hydraulics

    as is too often the case, what I thought would be a short morning project has turned into a nightmare. I went to remove the bolt holding the return hydraulic tube on in order to get to the filter...well somewhere in this machines past, someone had turned the nice hex-head bolt into a mangled...