Recent content by Russell L3560

I’ll drain and pull the crossover pipe to see if I can spot & flush out whatever is causing the clog. Stay tuned.

That makes sense, I’ve just never used one. I worry if I spot trash, etc or whatever is clogging my inlet, the hole for my crossover pipe won’t be big enough to fish it out and I’ll have to drop the tanks anyway.

its possible removing the crossover pipe may drain out what’s clogging my inlet but really can’t be sure, right? I had to replace the crossover pipe awhile back because I high-centered a stump. I’m afraid my check valve flapper may have worked loose and be what’s clogging the inlet. I saw that...

I need to find out what is clogging my tank inlet (only runs for a few mins after blowing air back into the tank) but can’t find a how-to video anywhere on the net. I’m afraid to disassemble then not be able to get it to the dealer if I can’t reassemble. Thanks!

I still have the same problem, even worse. I called the dealer and they said it’s a super common problem but the tank has to be dropped and flushed. That hose is def easy to remove but I believe there’s more work once you remove the hose. That would allow the tank to drain but I’m going to...

im going to make sure the fuel cap is venting properly and report back

My tank is under my cab

You guys are great, such good info! Someone mentioned the cap not venting properly. I lost the fuel cap a few years back (left it at the pump) and replaced it. Now that I think about it, my problems seemed to have started around that time. Talk about an easy (potential) solution! My tank is...

First time poster here. I have a 2020 L3560 with 200hrs. Occasionally the machine starves for fuel (seems to happen more with <1/4 tank). It tries to run but dies. Ive replaced the fuel filters and emptied my separator without luck. The only thing that works is loosening the fuel cap and...