Recent content by rkidd

I have a B2650 that has same pto hp as yours and run a landpride rtr 66" with no problem in untilled ground in low range of course.

sorry just saw this post. Do you still need some help?

They are the same bracket you see under the floor pan. They were too wide so I welded a stud to the loader arm and repainted area and just use the top half of the mount.

Steal away I made them out of 1/8" steel. I forget where I found the vinyl covers for them but they fit perfect over the 1" wide levers I made. They work really well.

No problem at all. I was concerned about it and would have put some fittings on 2 of them to make room if needed. I forgot to mention when I did the valves I ran hoses up front for grapple or angle blade with quick couplers and would tie into one of the spool valves when I need to use it. Was...

It was a task for sure. It is amazing how fast an area fills up with brackets, valves, and hoses and not interfere with something else. Was some trial and error for sure!

I have a nice heated shop for all my toys and thought about adding another bay with a higher door, but at my age I decided against it. Decided to live with what I got and am happy to have it!

Understand about the lights but I had to do them due to the fact I cant get tractor into my garage with rops up.

Thought I would take a minute and share how good these Kubota tractors are. I have put more than 2100 hrs on my tractor. The old timers on here will know I am a retired heavy eqiupment operator and to share with the new people on this site. Bought my tractor new in spring of 2015 with loader and...

A few years back I designed and fabbed up tool boxes for my B2650 rops and my buddys B2650 cab model. Fabbed them up out of 1/8 steel all welded together that used the existing holes in the loader frame to mount them to. Kept them even with the loader frame on the bottom for protection and...

I have had that problem also. Just some lube on those pivot points makes all the difference!!