rkidd's latest activity

  • rkidd
    I have a B2650 that has same pto hp as yours and run a landpride rtr 66" with no problem in untilled ground in low range of course.
  • rkidd
    sorry just saw this post. Do you still need some help?
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
    They are the same bracket you see under the floor pan. They were too wide so I welded a stud to the loader arm and repainted area and...
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
    Steal away I made them out of 1/8" steel. I forget where I found the vinyl covers for them but they fit perfect over the 1" wide levers...
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
    No problem at all. I was concerned about it and would have put some fittings on 2 of them to make room if needed. I forgot to mention...
    • 20171223_114345.jpg
    • 20180111_134113.jpg
    • 20180111_100411.jpg
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
    It was a task for sure. It is amazing how fast an area fills up with brackets, valves, and hoses and not interfere with something else...
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
    I have a nice heated shop for all my toys and thought about adding another bay with a higher door, but at my age I decided against it...
  • rkidd
    rkidd replied to the thread 2100 hrs on my B2650.
    Understand about the lights but I had to do them due to the fact I cant get tractor into my garage with rops up.
  • rkidd
    Thought I would take a minute and share how good these Kubota tractors are. I have put more than 2100 hrs on my tractor. The old timers...