RBsingl's latest activity
-
RRBsingl reacted to RCW's post in the thread Photo shoot anything lately? Random Photo Thread with
Like.
There’s not a lot of advantages to snow and below zero temperatures, but that’s one of them right there…..😳 -
RRBsingl reacted to Botamon's post in the thread Photo shoot anything lately? Random Photo Thread with Wow.
Here in northern Nevada we grow them big: But their sting is no worse that a bee or ant bite. Down in southern Nevada they have...
-
RI thonk you should let a shop evaluate and prep the block BEFORE buying any parts. They will measure, correct any problems, and tell...
-
RImpact wrenches are fine for removing bolts or putting them back in without tightening. For tightening the torque is totally undefined...
-
RRBsingl replied to the thread Mid Mount Mower blades.I used ramps for the MMM on my Deere 955 with an impact but I only used the impact for removing and not installing the blades. I use...
-
-
RMy first tractor had a belly mower. For blade maintenance I ran it up on a pair of car ramps. And yes, an impact wrench is certainly...
-
RTo add to the above post, use an impact wrench to remove the blade bolts. It makes the job much easier.
-
RRBsingl replied to the thread Main 9 wire connector B7100HST old.Molex likely still has a current part that fits, check the spec sheets and measurements to see if you find a match. This is from...
-
RRBsingl reacted to McMXi's post in the thread Photo shoot anything lately? Random Photo Thread with Like.
The Big Horn range in Sheridan, WY this past Sunday morning (May 25th) on my way to Illinois for a week for work, and then picking up a...
-
RThanks for all the responses. Just re-enforces my thoughts on mowing without the FEL getting in the way. Plus I have a lot of obstacles...
-
RRBsingl reacted to old and tired's post in the thread Photo shoot anything lately? Random Photo Thread with Like.
Had a '78, I should have learned to weld earlier in life... I would still be welding on my Scout!
-
RRBsingl replied to the thread FEL while mowing..I mowed my 5 acres for almost 30 years with a Deere 955 compact with 72" MM and the loader always came off first. Maneuverability was...
-
RJust to cover some basic questions. Did you change the fuel filter at 50 hrs? When you say the fuel level was at 2 bars, how long was...
-
RRBsingl replied to the thread Photo shoot anything lately? Random Photo Thread.It really looked nice in the parade. My parents had a '79 Scout II that was a fun vehicle. It could easily do a U-turn on a very...
-
RRBsingl reacted to old and tired's post in the thread Photo shoot anything lately? Random Photo Thread with Like.
Nice Scout...
