Recent content by Pepsiboy

  1. Pepsiboy

    Rebuilding My Tree Damaged Kubota BX24

    I tried to get the rear fender pan from my local Kubota dealer. WAY over priced at $975.00 US. My fixed income budget says NO WAY. In addition to that, IF I were to find one cheaper, installing it NOW is way off the page. Too cold to work on it outside. Dave
  2. Pepsiboy

    Things we wish Kubota would hear us on.

    The plastic fender pan, hood, and engine side panels just SUCK on the early BX models. Vibration breaks them up pretty fast. Just wondering if the METAL ones from the later BX models will fit the early models? And at what cost?
  3. Pepsiboy

    BX2230 key does not tun off engine

    tomtjp, First of all you need to use the right terminology. You are NOT reaching in to use the "choke". There is no choke on a diesel engine. You are probably pulling the fuel shut off with your hand. Use the diagnostics in the manual to figure out if it is the shut off solenoid, or the shut...
  4. Pepsiboy

    SNOW SHOES!

    Great idea ! ! Where die you get them and how much did they cost ?? Dave
  5. Pepsiboy

    BX snow blade and Quick Attach SOLD

    Rick, WOW, 3 to 4 day drive for me. Too far to go. Sorry to bother you. Dave
  6. Pepsiboy

    BX snow blade and Quick Attach SOLD

    Where are you located? If reasonably close to me, I would consider driving there to pick it up. Dave
  7. Pepsiboy

    BX2350 Metal Fender

    Ollie, Thanks for the reply about the "metal" fenders. I have tried that with my local dealer. They "insist" on having the serial number before looking up parts. I would go to another dealer, BUT, the next closest one is over 1 1/2 hours away, and they will not talk over the phone UNLESS the...
  8. Pepsiboy

    Rebuilding My Tree Damaged Kubota BX24

    Shhelby, As you replaced the REAR FENDER PAN on your BX, did Kubota indicate that MAYBE it would fit on a BX2350?? If so, what was the Kubota part number for the metal fender pan? I too, am fed up with all the plastic and would like to replace with metal. Thank you, in advance, for any and all...
  9. Pepsiboy

    BX2350 and BX2360 fender interchangeability

    I have had the same problem with my BX2350, and have asked the same question on several other forums. Also I asked the dealer where I purchased it new, and they said "Probably not, but, MAYBE it would". I asked them if they were to order one for me and it DIDN'T fit, could I return it and get...
  10. Pepsiboy

    Little red button

    It is the vent for the hydro unit. Just keep it clean so it doesn't get plugged. My BX2350 has one, too. Dave
  11. Pepsiboy

    BX2380 Running, will not turn off

    i7win7, WRONG ! ! ! ! The stop solenoid shuts off the FUEL, NOT the air intake. Dave
  12. Pepsiboy

    Hearing aids

    Steve67, I have no experience with that brand. I got the Resound brand from the VA. After 4 years of use I can't complain. Will be going in again in March to have the settings tweeked a bit for a little better hearing. They also gave me the Blue tooth adapters for my cell phone and TV so I can...
  13. Pepsiboy

    BX5450 snow thrower

    bhartel63, Not trying to be critical, BUT, one of the first things to remember after engaging the PTO is to throttle up to WIDE OPEN THROTTLE. If the impeller is no spinning fast enough it will not throw snow very far. Dave
  14. Pepsiboy

    Rebuilding My Tree Damaged Kubota BX24

    Nice looking tractor. For me the back hoe is only a dream. Very limited income says I can not have one, even though there are times when I could REALLY use one. Dave
  15. Pepsiboy

    Rebuilding My Tree Damaged Kubota BX24

    Shelby04861, That is what I usually do. I'm not in a super rush most of the time, PLUS, the rush shipping is WAY out of my budget. Thanks, again, for the information. I sure would like to see your pictures when done. Dave