old and tired's latest activity
-
Welllll....LOL!! I work at a dealer (not kubota and not cars). The dealer is attached (same building) as a 3rd generation electronics... -
Went to the dermatologist today, she wanted to know why my primary care didn't give me Doxycycline. She ordered that script and burned...
-
old and tired reacted to fatjay's post in the thread What did you do to or on your Kubota today? with
Like.
I finished tilling the area with my new holand, and got the garden fence up, and gate built. I'll spread the compost and till once more... -
old and tired reacted to Edke6bnl's post in the thread Hydraulic Drive pedal will not return to neutral position. with Like.
On my b7800 there is a grease zirk under the pedal to grease. May loosen it up
-
old and tired replied to the thread 50 hour maint.Just make sure it's sucking air and not blowing air in.... I only plan to make THAT mistake once... what a frigging mess that made.
-
OK, Saturday is here and here it is: Three 150 quart coolers of Boiled Crawfish. Two coolers of Corn. Two coolers of Red and White...
-
old and tired replied to the thread Ticks!.I had Lyme disease and put myself on Doxycycline. If you don't know, stay out of the sun. I work in cotton fields and tried to cover...
-
old and tired replied to the thread This is my 3pt ballast...............I didn't think the stand through all the way... I have most of my old crap propped up on cider blocks... can't see why that would not...
-
old and tired replied to the thread This is my 3pt ballast...............Since the pin location is at the lowest point, you have to pick the unit up to mount it on the tractor... Are you planning to make legs...
-
old and tired replied to the thread How does HST "speed control pedal" control engine rpm?.One other thing... feel free to throw out more questions, even if you think they are the dumbest ones... and that goes for anyone...
-
old and tired replied to the thread 8' Rear Offset Blade.Nice find... doesn't ring a bell for me. Already have tabs for some hydraulics... Can't tell, does it have a tilt feature, too?
-
old and tired replied to the thread How does HST "speed control pedal" control engine rpm?.HST petal only regulates how much oil is used to go forward and reverse... Engine RPM's is a totally different controller, the hand...
-
old and tired replied to the thread Custom Grading Blade Cutting Edge.I'd run it as is... it looks to have more than an inch of blade left before anything needs to be replaced. If you want, flip the blade...
-
old and tired reacted to Yotekiller's post in the thread Advice on first real tractor for retirement. with Like.
Actually, that's been said a BUNCH! Usually by people who either discover the larger tractor and it's turning radius or width is too...
-
old and tired replied to the thread Advice on first real tractor for retirement..https://www.wrlonginc.com/single-dual-dualx WR Long bolt on grapple and I also have their bolt on Tooth Bar (nice combination) glad to...
-
