Recent content by MOW

They didn’t say anything about taking anything off the block. I just told them them to put new sleeves in. The block didn’t look like it had anything shaved off. Just the pin pipe was gone. I think they may have used a press for the sleeves and forgot the pin pipe was there. I ordered a new pin...

I have a big oil leak between the block and head right above the oil pressure sensor. First time I forgot the oil ring. I took the head back off to put an o ring on the pin pine and notice that the pin pipe is flush with the block. I took the block to a machine shop and had new sleeves put in. I...

Thanks I don’t know how I missed that.

I recently rebuilt the motor in my b7100. The tractor over headed and crack the head. After replacing the head I have a big oil leak right above the oil pressure sensor. It is leaking between the block and head. I didn’t see anything about an o ring I that area. Does an o ring go in between the...

So connect lines 1&2 together and the third line is going back to the tank. I can leave the third line unhooked

so connect the two lines coming from the block together and the power beyond line can stay unhooked. Just no 3pt power. Thanks that is what I needed to know

I have a b7100 hst with a b1630 FEL. I recently rebuilt the motor and was wondering if there was a way to bypass the hydraulic lines going to the FEL. I would like to start the motor before I put the FEL back on. I didn’t want to run the hydraulic pump without hydraulic fluid flowing Thur the...